03-05-2014 06:20 AM - edited 07-05-2021 12:20 AM
5508 WLC (7.5.102)
AP36021
We currently have a test WiFi SSID setup that uses basic mac filtering on our WLC's
WLAN is configured with WPA and WPA2 L2 Security with WPA Policy and WPA2 Encryption.
For some reason we seem to be getting very slow speeds on clients with 2.4GHZ
for example speedtest.net I get 70mg upload and 65mg download on 5GHZ devices and about 1-3mg download and 1mg upload for 2.4GZ devices!
AP36021 are dual band with 4 channels (2 x 2.4Ghz and 2 x 5Ghz)
fyi - There are no dropped packets on the client stats via Prime mgmt that use 2.4GHZ
Any ideas here?
03-05-2014 06:22 AM
paste sh wlan
and the paste swicth port config where WLC and AP connected
Regards
03-05-2014 06:39 AM
Foreign Primary WLC (let me know if you need the Anchor controller ouput as well)
We have 3 ports configured as 0/12 trunked
interface GigabitEthernet0/12
description + WLC ****
switchport access vlan 999
switchport trunk encapsulation dot1q
switchport trunk native vlan 999
switchport trunk allowed vlan 10,30,40
switchport mode trunk
switchport nonegotiate
load-interval 30
no cdp enable
channel-group 3 mode on
spanning-tree portfast
end
Building configuration...
Current configuration : 330 bytes
!
interface Port-channel3
description + WLC ****
switchport access vlan 999
switchport trunk encapsulation dot1q
switchport trunk native vlan 999
switchport trunk allowed vlan 10,30,40
switchport mode trunk
switchport nonegotiate
logging event trunk-status
logging event bundle-status
load-interval 30
end
AP switch port config
Building configuration...
Current configuration : 617 bytes
!
interface GigabitEthernet4/32
description AP36021
switchport
switchport access vlan 30
switchport mode access
switchport voice vlan 20
load-interval 30
speed auto 10 100
wrr-queue bandwidth 5 90 5
wrr-queue queue-limit 5 80 5
wrr-queue random-detect min-threshold 2 70 100 100 100 100 100 100 100
wrr-queue random-detect min-threshold 3 70 100 100 100 100 100 100 100
wrr-queue random-detect max-threshold 2 100 100 100 100 100 100 100 100
wrr-queue cos-map 2 1 0 1 2 4
wrr-queue cos-map 3 1 3 6 7
no snmp trap link-status
mls qos trust cos
no mdix auto
spanning-tree portfast
end
show wlan 4
WLAN Identifier.................................. 4
Profile Name..................................... WLKPV
Network Name (SSID).............................. WLKPV
Status........................................... Enabled
MAC Filtering.................................... Enabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status
Radius Profiling ............................ Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Local Profiling ............................. Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
--More-- or (q)uit
Number of Active Clients......................... 21
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 7200 seconds
User Idle Timeout................................ Disabled
Sleep Client..................................... disable
Sleep Client Timeout............................. 12 hours
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... hellotest
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ new-byod
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
WLAN Layer2 ACL.................................. unconfigured
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
PMIPv6 Mobility Type............................. none
PMIPv6 MAG Profile........................... Unconfigured
PMIPv6 Default Realm......................... Unconfigured
--More-- or (q)uit
PMIPv6 NAI Type.............................. Hexadecimal
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
--More-- or (q)uit
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Global Servers
Accounting.................................... Global Servers
Interim Update............................. Disabled
Framed IPv6 Acct AVP ...................... Prefix
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Disabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Disabled
AES Cipher.............................. Enabled
--More-- or (q)uit
Auth Key Management
802.1x.................................. Disabled
PSK..................................... Enabled
CCKM.................................... Disabled
FT-1X(802.11r).......................... Disabled
FT-PSK(802.11r)......................... Disabled
PMF-1X(802.11w)......................... Disabled
PMF-PSK(802.11w)........................ Disabled
FT Reassociation Timeout................... 20
FT Over-The-DS mode........................ Enabled
GTK Randomization.......................... Disabled
SKC Cache Support.......................... Disabled
CCKM TSF Tolerance......................... 1000
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Enabled
FlexConnect Local Switching................... Disabled
--More-- or (q)uit
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
flexconnect PPPoE pass-through................ Disabled
flexconnect local-switching IP-source-guar.... Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Split Tunnel (Printers).......................... Disabled
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
--More-- or (q)uit
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
------- --------------- ------
4 10.x.x.x Up
4 10.x.x.x Up
802.11u........................................ Disabled
MSAP Services.................................. Disabled
03-05-2014 06:56 AM
interface GigabitEthernet0/12description + WLC ****
switchport access vlan 999
switchport trunk encapsulation dot1q
switchport trunk native vlan 999
switchport trunk allowed vlan 10,30,40
switchport mode trunk
switchport nonegotiate
load-interval 30
no cdp enable
channel-group 3 mode on
spanning-tree portfast
end
Building configuration...
Current configuration : 330 bytes
!
interface Port-channel3
description + WLC ****
switchport access vlan 999
switchport trunk encapsulation dot1q
switchport trunk native vlan 999
switchport trunk allowed vlan 10,30,40
switchport mode trunk
switchport nonegotiate
logging event trunk-status
logging event bundle-status
load-interval 30
end
Can you try to remove this command from port and etherchannel:
switchport access vlan 999
Regards
03-05-2014 06:42 AM
Can be also channel utilization. Use iperf to test in your local network.
Sent from Cisco Technical Support iPhone App
03-05-2014 07:11 AM
Client Iperf
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 256 KByte (WARNING: requested 250 KByte)
------------------------------------------------------------
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 256 KByte (WARNING: requested 256 KByte)
------------------------------------------------------------
------------------------------------------------------------
Client connecting to 192.168.1.199, TCP port 5001
TCP window size: 256 KByte (WARNING: requested 256 KByte)
------------------------------------------------------------
[ 7] local 192.168.9.152 port 47166 connected with 192.168.1.199 port 5001
[ 8] local 192.168.9.152 port 47167 connected with 192.168.1.199 port 5001
[ 12] local 192.168.9.152 port 47169 connected with 192.168.1.199 port 5001
[ 11] local 192.168.9.152 port 47168 connected with 192.168.1.199 port 5001
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 256 KByte (WARNING: requested 256 KByte)
------------------------------------------------------------
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 256 KByte (WARNING: requested 256 KByte)
------------------------------------------------------------
------------------------------------------------------------
Client connecting to 192.168.1.199, TCP port 5001
TCP window size: 256 KByte (WARNING: requested 256 KByte)
------------------------------------------------------------
[ 11] local 192.168.9.152 port 47180 connected with 192.168.1.199 port 5001
[ 6] local 192.168.9.152 port 47177 connected with 192.168.1.199 port 5001
[ 7] local 192.168.9.152 port 47178 connected with 192.168.1.199 port 5001
[ 8] local 192.168.9.152 port 47179 connected with 192.168.1.199 port 5001
[ 5] local 192.168.9.152 port 47176 connected with 192.168.1.199 port 5001
[ 12] local 192.168.9.152 port 47181 connected with 192.168.1.199 port 5001
Waiting for server threads to complete. Interrupt again to force quit.
[ ID] Interval Transfer Bandwidth[ 5] 0.0-63.8 sec 1.25 MBytes 164 Kbits/sec[ 6] 0.0-66.1 sec 1.88 MBytes 238 Kbits/sec
[ 8] 0.0-67.5 sec 1.00 MBytes 124 Kbits/sec[ 11] 0.0-68.6 sec 2.00 MBytes 244 Kbits/sec
[ 12] 0.0-69.1 sec 2.38 MBytes 288 Kbits/sec
[SUM] 0.0-69.1 sec 9.75 MBytes 1.18 Mbits/sec
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 256 KByte (WARNING: requested 256 KByte)
------------------------------------------------------------
------------------------------------------------------------
Client connecting to 192.168.1.199, TCP port 5001
TCP window size: 256 KByte (WARNING: requested 256 KByte)
------------------------------[ 11] local 192.168.9.152 port 47186 connected with 192.168.1.199 port 5001
[ 5] local 192.168.9.152 port 47182 connected with 192.168.1.199 port 5001
[ 6] local 192.168.9.152 port 47183 connected with 192.168.1.199 port 5001
[ 8] local 192.168.9.152 port 47185 connected with 192.168.1.199 port 5001
[ 12] local 192.168.9.152 port 47187 connected with 192.168.1.199 port 5001
[ 7] locWaiting for server threads to complete. Interrupt again to force quit.[ ID] Interval Transfer Bandwidth
[ 8] 0.0-66.5 sec 1.62 MBytes 205 Kbits/sec
[ 7] 0.0-66.5 sec 1.12 MBytes 142 Kbits/sec
[ 11] 0.0-66.6 sec 1.88 MBytes 236 Kbits/sec
[ 6] 0.0-66.7 sec 1.38 MBytes 173 Kbits/sec
[ 12] 0.0-75.3 sec 1.75 MBytes 195 Kbits/sec
[ 5] 0.0-82.5 sec 1.38 MBytes 140 Kbits/sec
[SUM] 0.0-82.5 sec 9.12 MBytes 927 Kbits/sec
Serve Iperf
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 512 KByte (WARNING: requested 256 KByte)
------------------------------------------------------------
[ 4] local 192.168.1.199 port 5001 connected with 192.168.9.152 port 47176
[ 6] local 192.168.1.199 port 5001 connected with 192.168.9.152 port 47179
[ ID] Interval Transfer Bandwidth
[ 7] 0.0-66.1 sec 1.25 MBytes 159 Kbits/sec
------------------------------------------------------------
[ 13] local 192.168.1.199 port 49124 connected with 192.168.9.152 port 5001
------------------------------------------------------------
Client connecting to 192.168.9.152, TCP port 5001
TCP window size: 512 KByte (WARNING: requested 256 KByte)
------------------------------------------------------------
[ 5] 0.0-67.5 sec 1.88 MBytes 233 Kbits/sec
[ 20] local 192.168.1.199 port 49132 connected with 192.168.9.152 port 5001
[ 17] local 192.168.1.199 port 49129 connected with 192.168.9.152 port 5001
[ 7] local 192.168.1.199 port 49128 connected with 192.168.9.152 port 5001
[ 19] locconnect failed: Connection refusedconnect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
[ 9] 0.0-71.8 sec 2.38 MBytes 277 Kbits/sec
[ 6] 0.0-71.9 sec 1.00 MBytes 117 Kbits/sec
[ 10] 0.0-71.9 sec 2.00 MBytes 233 Kbits/sec
[SUM] 0.0-71.9 sec 9.75 MBytes 1.14 Mbits/sec
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connecconnect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refusconnect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
Waiting for server threads to complete. Interrupt again to force quit.
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 512 KByte (WARNING: requested 256 KByte)
-------------------------------------[ 4] local 192.168.1.199 port 5001 connected with 192.168.9.152 port 47182[ 5] local 192.168.1.199 port 5001 connected with 192.168.9.152 port 47183
[ 9] local 192.168.1.199 port 5001 connected with 192.168.9.152 port 47187
[ 6] local 192.168.1.199 port 5001 connected with 192.168.9.152 port 47184
[ 7] local 192.168.1.199 port 5001 connected with 192.168.9.152 port 47185
[ 10] local 192.168.1.199 port 5001 connected with 192.168.9.152 port 47186
[ ID] Interval Transfer Bandwidth
[ 11] local 192.168.1.199 port 5001 connected with 192.168.9.148 port 52846
[ 18] local 192.168.1.199 port 5001 connected with 192.168.9.148 port 52850
[ 10] 0.0-69.8 sec 1.88 MBytes 225 Kbits/sec
[ 19] local 192.168.1.199 port 5001 connected with 192.168.9.148 port 52849
[ 31] local 192.168.1.199 port 5001 connected with 192.168.9.148 port 52847
[ 32] local 192.168.1.199 port 5001 connected with 192.168.9.1[ 5] 0.0-70.0 sec 1.38 MBytes 165 Kbits/sec
[ 6] 0.0-70.3 sec 1.12 MBytes 134 Kbits/sec
------------------------------------------------------------
Client connecting to 192.168.9.152, TCP port 5001
TCP window size: 512 KByte (WARNING: requested 256 KByte)
------------------------------------------------------------
[ 16] local 192.168.1.199 port 49167 connected with 192.168.9.152 port 5001
[ 13] local 192.168.1.199 port 49162 connected with 192.168.9.152 port 5001
[ 14] local 192.168.1.199 port 49165 connected with 192.168.9.152 port 5001
[ 15] local 192.168.1.199 port 49166 connected with 192.168.9.152 port 5001
[ 7] local 192.168.1.199 port 49161 connected with 192.168.9.152 port 5001
[ 12] local 192.168.1.199 port 49163 connected with 192.168.9.152 port 5001
------------------------------------------------------------
Client connecting to 192.168.9.152, TCP port 5001
TCP window size: 512 KByte (WARNING: requested 256 KByte)
------------------------------------------------------------
[ 24] local 192.168.1.199 port 49173 connected with 192.168.9.152 po------------------------------------------------------------
Client connecting to 192.168.9.152, TCP port 5001
TCP window size: 512 KByte (WARNING: requested 256 KByte)
03-05-2014 07:12 AM
Server was on 5GHZ
Cient on 2.4GHZ
03-05-2014 07:57 AM
Can you post a client to server on both the 5ghz and then one with both on the 2.4ghz.
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****
03-06-2014 02:58 AM
Scott, as requested.....
Server 5GHZ
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 512 KByte (WARNING: requested 256 KByte)
------------------------------------------------------------
[ 4] local 192.168.9.158 port 5001 connected with 192.168.1.190 port 37085
[ 7] local 192.168.9.158 port 5001 connected with 192.168.1.190 port 37083[ ID] Interval Transfer Bandwidthconnect failed: Connection refused[ 4]
0.0-62.4 sec 8.75 MBytes 1.18 Mbits/sec
[ 9] 0.0-62.5 sec 11.1 MBytes 1.49 Mbits/sec
[ 10] 0.0-62.6 sec 10.2 MBytes 1.37 Mbits/sec
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refusedconnect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
[ 6] 0.0-62.7 sec 6.88 MBytes 920 Kbits/sec
[SUM] 0.0-62.7 sec 55.9 MBytes 7.48 Mbits/sec
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
Client 5GHZ
/data/data/com.magicandroidapps.iperf/bin/iperf: ignoring extra argument -- Iperf
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 512 KByte (WARNING: requested 256 KByte)
------------------------------------------------------------
connect failed: No route to host
connect failed: No route to host
connect failed: No route to host
connect failed: No route to host
connect failed: No route to host
connect failed: No route to host
/data/data/com.magicandroidapps.iperf/bin/iperf: ignoring extra argument -- Iperf
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 512 KByte (WARNING: requested 256 KByte)
------------------------------------------------------------
------------------------------------------------------------
Client connecting to 192.168.9.158, TCP port 5001
TCP window size: 512 KByte (WARNING: requested 256 KByte)
------------------------------------------------------------
[ 5] local 192.168.1.190 port 37082 connected with 192.168.9.158 port 5001
[ 10] local 192.168.1.190 port 37086 connected with 192.168.9.158 port 5001
[ 9] local 192.168.1.190 port 37085 connected with 192.168.9.158 port 5001
[ 8] local 192.168.1.190 port 37084 connected with 192.168.9.158 port 5001
[ 7] local 192.168.1.190 port 37083 connected with 192.168.9.158 port 5001
[ 11] local 192.168.1.190 port 37087 connected with 192.168.9.158 port 5001
Waiting for server threads to complete. Interrupt again to force quit.
[ 5] 0.0-60.4 sec 11.1 MBytes 1.55 Mbits/sec
[ 7] 0.0-60.4 sec 10.2 MBytes 1.42 Mbits/sec
[ 8] 0.0-60.4 sec 10.2 MBytes 1.42 Mbits/sec
[ 11] 0.0-60.5 sec 6.88 MBytes 953 Kbits/sec
[ 9] 0.0-60.7 sec 8.75 MBytes 1.21 Mbits/sec
[SUM] 0.0-60.7 sec 55.9 MBytes 7.73 Mbits/sec
Server 2.4GHZ
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 512 KByte (WARNING: requested 256 KByte)
------------------------------------------------------------
[ 4] local 192.168.9.158 port 5001 connected with 192.168.9.152 port 55672[ 5] local 192.168.9.158 port 5001 connected with 192.168.9.152 port 55673
[ 6] local 192.168.9.158 port 5001 connected with 192.168.9.152 port 55674
[ 7] local 192.168.9.158 port 5001 connected with 192.168.9.152 port 55670
[ 10] local 192.168.9.158 port 5001 connected with 192.168.9.152 port 55671
[ ID] Interval Transfer Bandwidth
[ 7] 0.0-98.4 sec 768 KBytes 63.9 Kbits/sec
------------------------------------------------------------[ 7] local 192.168.9.158 port 60640 connected with 192.168.9.152 port 5001
[ 6] 0.0-127.9 sec 384 KBytes 24.6 Kbits/sec
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refusedconnect failed: Connection refused
Waiting for server threads to complete. Interrupt again to force quit.
[ 16] 0.0-60.0 sec 88657964739271040 bits 0.00 (null)s/sec
[ 14] 0.0-60.0 sec 86059324842202368 bits 0.00 (null)s/sec
[ 12] 0.0-60.0 sec 67923022280180696 bits 0.00 (null)s/sec
[ 13] 0.0-60.0 sec 76932626714509728 bits 0.00 (null)s/sec
[ 15] 0.0-60.0 sec 74023593825998688 bits 0.00 (null)s/sec
[ 7] 0.0-60.0 sec 79947667985795968 bits 0.00 (null)s/sec
[SUM] 0.0-60.0 sec 473544200387958464 bits 0.00 (null)s/sec
Client 2.4GHZ
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 256 KByte (WARNING: requested 256 KByte)
------------------------------------------------------------
------------------------------------------------------------
Client connecting to 192.168.9.158, [ 7] local 192.168.9.152 port 55671 connected with 192.168.9.158 port 5001
[ 8] local 192.168.9.152 port 55672 connected with 192.168.9.158 port 5001
[ 11] local 192.168.9.152 port 55673 connected with 192.168.9.158 port 5001
[ 12] local 192.168.9.152 port 55674 connected with 192.168.9.158 port 5001
[ 5] local 192.168.9.152 port 55669 connected with 192.168.9.158 port 5001
[ 6] local 192.168.9.152 port 55670 connected with 192.168.9.158 port 5001
Waiting for server threads to complete. Interrupt again to force quit.
[ ID] Interval Transfer Bandwidth
[ 7] 0.0-62.9 sec 512 KBytes 66.7 Kbits/sec
[ 6] 0.0-69.8 sec 768 KBytes 90.1 Kbits/sec
[ 11] 0.0-70.5 sec 384 KBytes 44.6 Kbits/sec
[ 12] 0.0-72.2 sec 384 KBytes 43.6 Kbits/sec
[ 5] 0.0-72.4 sec 256 KBytes 29.0 Kbits/sec
[ 8] 0.0-321.1 sec 331 KBytes 8.44 Kbits/sec
[SUM] 0.0-321.1 sec 2.57 MBytes 67.2 Kbits/sec
03-06-2014 05:19 AM
Looks like you have issues on both bands... you should not see the following:
connect failed: Connection refused
connect failed: Connection refused
If you do a file transfer using FileZilla or and FTP client that does show the transfer rate, can you perform the same test... both on the 2.4ghz and both on the 5ghz.
Also post your show wlan
Seems like you have an issue in the network or a configuration issue.
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****
03-06-2014 05:34 AM
Here is the WLAN - I'll organise file transfer soon.
>show wlan 4
WLAN Identifier.................................. 4
Profile Name..................................... TEST
Network Name (SSID).............................. TEST
Status........................................... Enabled
MAC Filtering.................................... Enabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status
Radius Profiling ............................ Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Local Profiling ............................. Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
--More-- or (q)uit
Number of Active Clients......................... 24
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 7200 seconds
User Idle Timeout................................ Disabled
Sleep Client..................................... disable
Sleep Client Timeout............................. 12 hours
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... WLC
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ new-byod
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
WLAN Layer2 ACL.................................. unconfigured
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
PMIPv6 Mobility Type............................. none
PMIPv6 MAG Profile........................... Unconfigured
PMIPv6 Default Realm......................... Unconfigured
--More-- or (q)uit
PMIPv6 NAI Type.............................. Hexadecimal
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
--More-- or (q)uit
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Global Servers
Accounting.................................... Global Servers
Interim Update............................. Disabled
Framed IPv6 Acct AVP ...................... Prefix
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Disabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Disabled
AES Cipher.............................. Enabled
--More-- or (q)uit
Auth Key Management
802.1x.................................. Disabled
PSK..................................... Enabled
CCKM.................................... Disabled
FT-1X(802.11r).......................... Disabled
FT-PSK(802.11r)......................... Disabled
PMF-1X(802.11w)......................... Disabled
PMF-PSK(802.11w)........................ Disabled
FT Reassociation Timeout................... 20
FT Over-The-DS mode........................ Enabled
GTK Randomization.......................... Disabled
SKC Cache Support.......................... Disabled
CCKM TSF Tolerance......................... 1000
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Enabled
FlexConnect Local Switching................... Disabled
--More-- or (q)uit
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
flexconnect PPPoE pass-through................ Disabled
flexconnect local-switching IP-source-guar.... Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Split Tunnel (Printers).......................... Disabled
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
--More-- or (q)uit
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
------- --------------- ------
4 10.x.x.100 Up
4 10.x.x.101 Up
802.11u........................................ Disabled
MSAP Services.................................. Disabled
Local Policy
----------------
Priority Policy Name
-------- ---------------
03-06-2014 05:51 AM
Okay... so you are anchoring.... can you test with an ssid that is not being anchored... need to get some baselines.
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****
03-06-2014 08:20 AM
I setup a TEST WLAN on the Foreign WLC only results as below
5GHZ server
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 512 KByte (WARNING: requested 256 KByte)
------------------------------------------------------------
[ 4] local 10.136.8.173 port 5001 connected with 10.136.11.245 port 1918[ 5] local 10.136.8.173 port 5001 connected with 10.136.11.245 port 1917
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-61.7 sec 14.5 MBytes 1.97 Mbits/sec
------------------------------------------------------------
------------------------------------------------------------
Client connecting to 10.136.11.245, TCP port 5001
TCP window size: 512 KByte (WARNING: requested 256 KByte)
------------------------------------------------------------
connect failed: Connection refused
[ 10] 0.0-64.2 sec 15.2 MBytes 1.99 Mbits/sec[ 7] 0.0-64.3 sec 15.4 MBytes 2.01 Mbits/sec
[ 5] 0.0-64.3 sec 15.4 MBytes 2.00 Mbits/sec
connect failed: Connection refused
[ 9] 0.0-64.3 sec 15.4 MBytes 2.00 Mbits/sec
[ 6] 0.0-64.3 sec 15.4 MBytes 2.00 Mbits/sec
[SUM] 0.0-64.3 sec 91.2 MBytes 11.9 Mbits/sec
------------------------------------------------------------
Client connecting to 10.136.11.245, TCP port 5001
TCP window size: 512 KByte (WARNING: requested 256 KByte)
------------------------------------------------------------
connect failed: Connection refused
connect failed: Connection refused
connect failed: Connection refused
5GHZ client
C:\iperf>iperf -c 10.136.8.173 -P 6 -w 256k -r -t 60
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 256 KByte
------------------------------------------------------------
------------------------------------------------------------
Client connecting to 10.136.8.173, TCP port 5001
TCP window size: 256 KByte
------------------------------------------------------------
[ 7] local 10.136.11.245 port 1919 connected with 10.136.8.173 port 5001
[ 8] local 10.136.11.245 port 1920 connected with 10.136.8.173 port 5001
[ 9] local 10.136.11.245 port 1921 connected with 10.136.8.173 port 5001
[ 5] local 10.136.11.245 port 1917 connected with 10.136.8.173 port 5001
[ 6] local 10.136.11.245 port 1918 connected with 10.136.8.173 port 5001
[ 3] local 10.136.11.245 port 1916 connected with 10.136.8.173 port 5001
[ ID] Interval Transfer Bandwidth
[ 6] 0.0-57.8 sec 14.5 MBytes 2.10 Mbits/sec
[ 6] local 10.136.11.245 port 5001 connected with 10.136.8.173 port 58804
[ 10] local 10.136.11.245 port 5001 connected with 10.136.8.173 port 58806
[ 11] local 10.136.11.245 port 5001 connected with 10.136.8.173 port 58807
[ 12] local 10.136.11.245 port 5001 connected with 10.136.8.173 port 58808
[ 13] local 10.136.11.245 port 5001 connected with 10.136.8.173 port 58809
[ 7] 0.0-60.6 sec 15.2 MBytes 2.11 Mbits/sec
[ 9] 0.0-60.7 sec 15.4 MBytes 2.12 Mbits/sec
[ 5] 0.0-60.7 sec 15.4 MBytes 2.12 Mbits/sec
[ 8] 0.0-60.8 sec 15.4 MBytes 2.12 Mbits/sec
[ 3] 0.0-60.8 sec 15.4 MBytes 2.12 Mbits/sec
[SUM] 0.0-60.8 sec 91.2 MBytes 12.6 Mbits/sec
[ 3] local 10.136.11.245 port 5001 connected with 10.136.8.173 port 58810
2.4GHZ client
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 256 KByte (WARNING: requested 256 KByte)
------------------------------------------------------------
------------------------------------------------------------
Client connecting------------------------------------------------------------
Client connecting to 10.136.8.173, TCP port 5001
TCP window size: 256 KByte (WARNING: requested 256 KByte)
------------------------------------------------------------
[ 12] local 10.136.9.98 port 32839 connected with 10.136.8.173 port 5001
[ 5] local 10.136.9.98 port 32834 connected with 10.136.8.173 port 5001
[ 7] local 10.136.9.98 port 32836 connected with 10.136.8.173 port 5001
[ 8] local 10.136.9.98 port 32837 connected with 10.136.8.173 port 5001
[ 6] local 10.136.9.98 port 32835 connected with 10.136.8.173 port 5001
[ 11] local 10.136.9.98 port 32838 connected with 10.136.8.173 port 5001
Waiting for server threads to complete. Interrupt again to force quit.[ ID] Interval Transfer Bandwidth[ 8] 0.0-93.3 sec 384 KBytes 33.7 Kbits/sec
[ 7] 0.0-95.7 sec 384 KBytes 32.9 Kbits/sec[ 6] 0.0-120.6 sec 384 KBytes 26.1 Kbits/sec
[ 5] 0.0-124.6 sec 384 KBytes 25.3 Kbits/sec
2.4GHZ server (timed out)
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 512 KByte (WARNING: requested 256 KByte)
------------------------------------------------------------
[ 4] local 10.136.8.173 port 5001 connected with 10.136.9.98 port 32834[ 5] local 10.136.8.173 port 5001 connected with 10.136.9.98 port 32836
[ 6] local 10.136.8.173 port 5001 connected with 10.136.9.98 port 32837
[ 7] local 10.136.8.173 port 5001 connected with 10.136.9.98 port 32835
[ 9] local 10.136.8.173 port 5001 connected with 10.136.9.98 port 32838
[ 10] local 10.136.8.173 port 5001 connected with 10.136.9.98 port 32839
03-06-2014 08:04 PM
Hi
Post the output of "show interface g4/32" as I would like to see it is negotiate to 1Gbps.
The command you entered "speed auto 10 100" under G4/32 may limit the port speed to 100Mbps.
HTH
Rasika
**** Pls rate all useful responses ****
03-10-2014 07:29 AM
Speed is now a-1000mb on the AP.
Still the same problem, in fact with the Andriod and Apple devices we are now getting >1mb upload and >1mb download with 2.4ghz via speedtest.net
My device 5GHZ i get 70mg download and 65mg upload via speedtest.net (Android)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide