Is it possible to assign to different SSID's on an 1121AP? I would like to have both SSID's apply to the local subnet. However, one SSID would use one WEP key, while the secondary SSID would use a different WEP key. I've configured both SSID's in the AP interface. My question is this: On the Security->Encryption Manager tab, do I have to do anything special to assign the Encryption Key to a specific SSID? Or will both entered keys apply to both SSID's automatically?
When there are two controllers, both of the controllers cannot be the primary. Only one controller can be the primary, and the other must be the secondary. As far as the AP that registers to the controller is concerned, it is recommended to set the switchport that the AP connects to as the access port, because the client VLAN is not related to the VLAN on which the AP sits. Following links may help you
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...