2006 Controller wont boot up

[mohankumarm]

Hi,

When i try to console to the 2006 Controller with terminal emulation software, nothing appears on the screen.the Comms parameters is set to 9600-8-N-1,terminal emulation doesn't work for both Auto Detect and VT100.

Thanks and Regards,

[Scott Fella]

Make sure you are using a null-modem cable.

[Stephen Rodriguez]

9600-none-8-1-none, make sure flow control is turned off, and a null modem cable. Don't try to use a standard console cable with an adapter on it.