cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2097
Views
10
Helpful
12
Replies

2500 series support mobility groups?

srgaskill1
Level 1
Level 1

Do you know if the new 2500 series controller supports things like mobility groups?  Could I use 2 of these and do inter-controller roaming.

Also do you know if this would work with a 2106 controller and a 2505 controller or are they 2 completely independent controllers only knowing about their own APs??

12 Replies 12

Surendra BG
Cisco Employee
Cisco Employee

Hi,

Here is the link that tells us the features htat are not supported on 2500!! rest all things are supported!!

http://www.cisco.com/en/US/partner/docs/wireless/controller/7.0MR1/configuration/guide/cg_overview.html#wp1169709

Please dont forget to rate the post if thids answered ur question!!

Regards

Surendra

Regards
Surendra BG

That link returns a permissions error...

pcroak
Cisco Employee
Cisco Employee

To answer your questions more specifically -- yes, the 2500 WLC supports mobility groups, and you can have mobility groups combined with the various controller platforms (2100,2500,4400,5500).

-Pat

http://www.cisco.com/en/US/customer/docs/wireless/controller/7.0MR1/configuration/guide/cg_overview.html#wp1169709

just have to change parnter to customer.

Steve

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Is mobility and roaming the same?

What if I have one 2500 WLC and 25 APs. Will roaming work or do I need WCS for that?

Hi smailmilak,

no mobility and roaming is not the same. You need for roaming between controllers a mobility configuration.

If you have only one 2500 WLC and 25 or more or less AP roaming between the AP on the one WLC will work well.

This calls Intra-Controller roaming

If you have 2 or more WLCs you need a proper mobility config for roaming between APs located on differen WLC.

This Calls Inter-Controller roaming.

More informations are here:

http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70mobil.html

Thank you for fast reply.

I will check the guide.

One more question please. Wireless Control System is not needed for roaming and Voice over WLAN?

WCS is for multiple WLC and some advanced features?

No, WCS is only a management software. It doesn't have any impact for roaming or else. Only for configuration.

Meantime it is replaced by NCS Prime.

You are welcome ;-)

Thank you Paul, you helped me a lot.

smailmilak,

Can you please rate the post if Paul has answered your question. This helps out knowing what has been answered.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Done.

Thank you

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Review Cisco Networking products for a $25 gift card