i have configured 2 ssid 1 for the infrastructure and the other for the clients,i have secured this using mac authentication.
this is working okay, I did add the mac addresses of the 1100 ap's to the mac authentication list (both ethernet and wifi mac address) in addition i have added the mac address of the root unit on the repeater unit so it knows which AP is its parent.
so far so good.
now when i reset the repeater unit it does not re-authenticate with the root AP.
it comes up with the following event on the root unit event log.
Interface Dot11Radio0, Station repeater-AP2 000e.8383.apap Associated KEY_MGMT[NONE]
Interface Virtual-Dot11Radio0, changed state to up
Packet to client 000e.8383.abab reached max retries, removing the client
Interface Dot11Radio0, Deauthenticating Station 000e.8383.abab Reason: Previous authentication no longer valid
Interface Virtual-Dot11Radio0, changed state to down
the repeater unit can no longer be pinged.
only when i restart the root unit does the repeater unit come back up
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...