Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

4400

which access point could be use on 4400 controller?

Is the AIR-AP1010 fitted on this?

Thanks

2 REPLIES
mx
New Member

Re: 4400

the 1010, 1020, and 1030 series will work but I think are now discontinued. The 1130 LWAP will as well as the 1230 once they have been 'upgraded' to the LWAP code.

Hall of Fame Super Red

Re: 4400

Hi Celso,

Have a look at the following;

This guide will help you to install a Cisco Aironet Lightweight Access Point Protocol (LWAPP)-enabled access point on your wireless network. The following Cisco Aironet access points currently support LWAPP:

•Cisco Aironet 1130AG

•Cisco Aironet 1200 series with 802.11g or the latest 802.11a radio (or both)

•Cisco Aironet 1240AG

LWAPP-enabled access points are part of the Cisco Integrated Wireless Network Solution and require no manual configuration before they are mounted. The access point is configured by an LWAPP-capable Cisco wireless LAN controller.

From this doc;

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_quick_start09186a00805100f5.html

Hope this helps!

Rob

Please remember to rate helpful posts........

126
Views
7
Helpful
2
Replies
CreatePlease to create content