Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

4402 controller = Limit certain ssid/Wlan to certain APs, possible?

Hello,

we have one 4402 wireless controller thats run about 15 Lightweight APs.

Is it possible to descide which APs that should have which Wlans? if it is, then how?

Grateful for any help!

Kristoffer

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: 4402 controller = Limit certain ssid/Wlan to certain APs, po

Hi Kris,

Yes it is very well possible using WLAN Override feature.

This link will clearly guide you how to achieve the same

http://www.cisco.com/en/US/docs/wireless/controller/4.2/configuration/guide/c42wlan.html#wp1127323

Incase you have any doubts please come back with the same.

HTH

Ankur

*Pls rate all helpful post

2 REPLIES
Cisco Employee

Re: 4402 controller = Limit certain ssid/Wlan to certain APs, po

Hi Kris,

Yes it is very well possible using WLAN Override feature.

This link will clearly guide you how to achieve the same

http://www.cisco.com/en/US/docs/wireless/controller/4.2/configuration/guide/c42wlan.html#wp1127323

Incase you have any doubts please come back with the same.

HTH

Ankur

*Pls rate all helpful post

New Member

Re: 4402 controller = Limit certain ssid/Wlan to certain APs, po

Thank you, that document said it all!

184
Views
5
Helpful
2
Replies
CreatePlease to create content