Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

4404 upgrade bootloader to 5.2.157

After upgrading the image on a 4404 I have downloaded the 5.2.157 bootloader as described in the release notes (http://www.cisco.com/en/US/products/ps6366/prod_release_notes_list.html) . However after downloading to the 4404, saving and rebooting a "show sysinfo" on the controller shows...

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 6.0.188.0
RTOS Version..................................... 6.0.188.0
Bootloader Version............................... 4.2.61.0
Emergency Image Version.......................... N/A
Build Type....................................... DATA + WPS

System Name...................................... xxxxxxx
System Location.................................. xxxxxxx
System Contact................................... xxxxxx

System ObjectID.................................. 1.3.6.1.4.1.14179.1.1.4.3
IP Address....................................... 10.41.0.3
System Up Time................................... 0 days 0 hrs 1 mins 39 secs
System Timezone Location......................... (GMT) London, Lisbon, Dublin, Edinburgh

Configured Country............................... GB  - United Kingdom
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +35 C

How can I get the bootloader to the correct level?

many thanks for any help,

1 ACCEPTED SOLUTION

Accepted Solutions
Gold

Re: 4404 upgrade bootloader to 5.2.157

There has always been confusion on this.  The image you upgraded was not the bootloader but the Emergency Image.  The bootloader is bundled with the primary image and is upgraded if needed.  Now I see you are also running 6.0.188.0 which has a bug which is why your ER image version shows as N/A.

2 REPLIES
Gold

Re: 4404 upgrade bootloader to 5.2.157

There has always been confusion on this.  The image you upgraded was not the bootloader but the Emergency Image.  The bootloader is bundled with the primary image and is upgraded if needed.  Now I see you are also running 6.0.188.0 which has a bug which is why your ER image version shows as N/A.

New Member

Re: 4404 upgrade bootloader to 5.2.157

Thanks for the info, and the quick response. It is pretty confusing

309
Views
0
Helpful
2
Replies
CreatePlease to create content