You must have one of the early 4800s. The one with the green power switch is the older model which is not entirely a 340 AP. It will work with the 340 NICs but not the 350s. The 340 AP (and the 4800b model) will work with the 350 cards (with a firmware upgrade in some cases).
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...