Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

5500 Controller/1200 Series AP Problem

I am having trouble getting a 1200 series AP to join our controller. We have 1252's and 1242's sucessfully connected. We are running the latest code on the controller. The LWAP image on the AP is c1200-rcvk9w8-tar.124-21a.JA2. This is what the AP says over the console connection:


*Mar  1 00:00:06.642: %LWAPP-3-CLIENTEVENTLOG: Unable to open event log file flash:/event.log

*Mar  1 00:00:06.644: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 0 messages)

*Mar  1 00:00:07.660:  STUB Called : crypto_ssl_init
*Mar  1 00:00:08.761: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar  1 00:00:08.798: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1200 Software (C1200-RCVK9W8-M), Version 12.4(21a)JA2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Mon 02-Nov-09 18:06 by prod_rel_team
*Mar  1 00:00:08.835: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar  1 00:00:09.761: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Mar  1 00:00:18.133: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 10.1.92.26, mask 255.255.255.0, hostname AP0015.6366.e33f

Translating "CISCO-CAPWAP-CONTROLLER.2000domain.hscast.com"...domain server (192.168.128.1)

Translating "CISCO-LWAPP-CONTROLLER.2000domain.hscast.com"...domain server (192.168.128.1)

*Mar  1 00:00:38.677: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Mar  1 00:00:38.679: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER.2000domain.hscast.com
*Mar  1 00:00:38.683: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER.2000domain.hscast.com
*Mar  1 00:00:48.685: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Feb 21 16:38:42.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.128.8 peer_port: 5246
*Feb 21 16:38:42.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Feb 21 16:38:43.893: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.128.8 peer_port: 5246
*Feb 21 16:38:43.895: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.128.8
*Feb 21 16:38:43.896: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Feb 21 16:38:43.905: %DTLS-5-ALERT: Received WARNING : Close notify alert from 192.168.128.8
*Feb 21 16:38:43.905: %DTLS-5-PEER_DISCONNECT: Peer 192.168.128.8 has closed connection.
*Feb 21 16:38:43.906: %DTLS-5-SEND_ALERT: Send WARNING : Close notify Alert to 192.168.128.8:5246
examining image...
*Feb 21 16:38:43.907: %CAPWAP-3-ERRORLOG: Go join a lwapp controller
*Feb 21 16:38:43.907: %LWAPP-3-CLIENTERRORLOG: Set Transport AddressCalled
*Feb 21 16:36:17.690: %LWAPP-5-CHANGED: CAPWAP changed state to IMAGE
*Feb 21 16:36:20.715: %CAPWAP-3-ERRORLOG: DTLS connection not found Failed to encrypt and send packet.
*Feb 21 16:36:20.716: %CAPWAP-3-ERRORLOG: Failed to send Join request to 192.168.128.8
%Error opening lwapp:/c1200 (Incorrect Login/Password)
archive download: takes 6 seconds

*Feb 21 16:36:23.691: %LWAPP-3-CLIENTERRORLOG:  Retransmission count for type (IMAGE_DATA) exceeded more than max(1)

It repeats this over and over. I can get the controller log as well, if need be. Please help!

  • Other Wireless - Mobility Subjects
1 ACCEPTED SOLUTION

Accepted Solutions

5500 Controller/1200 Series AP Problem

yeah you would have to go back to a 7.0.  I'd go with the latest 7.0 code

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
13 REPLIES

5500 Controller/1200 Series AP Problem

What version of code are you running on the WLC?  Can you capture the following debugs concurrently?

debug mac address < ap mac>

debug capwap events

debug capwap erros

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
Hall of Fame Super Silver

Re: 5500 Controller/1200 Series AP Problem

Did you add the ap 1200 mic/ssc to the 5508?

Thanks,

Scott Fella

Sent from my iPhone

Thanks, Scott *****Help out other by using the rating system and marking answered questions as "Answered"*****
New Member

Re: 5500 Controller/1200 Series AP Problem

Here is the code we are running on the WLC: AIR-CT5500-K9-7-2-103-0. Attached is a log file from the debug commands.

Re: 5500 Controller/1200 Series AP Problem

ok.  7.2 does not support the 1200 AP.  1130, 1240 and anything newer.

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

5500 Controller/1200 Series AP Problem

Ah. Ok. Thank you. Would we have to go back to an older code to support them? And if so, which version?

5500 Controller/1200 Series AP Problem

yeah you would have to go back to a 7.0.  I'd go with the latest 7.0 code

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

5500 Controller/1200 Series AP Problem

Thank you very much Stephen. We will do that.

New Member

Re: 5500 Controller/1200 Series AP Problem

I have the same problem my controller runed in

7.4.110.0 (default) (active) version

debugs are attached

please suggest

VIP Purple

Re: 5500 Controller/1200 Series AP Problem

Hi Karen,

Can you please create a new thread and post these details.

From WLC: sh sysinfo

From AP: sh version

Regards

1786
Views
0
Helpful
13
Replies