Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

5508 WLC Upgrade steps

Single 5508 WLC with 8 x 1142 APs.

5508 is running FUS 1.3, software version 7.0.116.0, field recovery image 6.0.182.0.

I need to bring the software version up to at least 7.2.115 to support 2 new 2602 AP i need to install.

Question is; do I install FUS 1.9 then update my controller to 7.6.120 or do I need to do any intermediate steps?

This is my first time upgrading a WLC so I'm fresh and this is a production WLC.

 

Cheers

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

just adding more linkshttp:/

just adding more links

http://jackstromberg.com/2014/04/tutorial-upgrading-the-firmware-on-a-cisco-5508-wireless-lan-controller/

http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn7-0.html

http://www.cisco.com/c/en/us/tech/wireless-2f-mobility/wireless-lan-wlan/tech-configuration-examples-list.html

3 REPLIES
VIP Purple

Hi Fisher.Normally It doesn't

Hi Fisher.

Normally It doesn't matter as long as you get it done but make sure that you reboot the WLC before doing the next. 

 

Here is the procedure for FUS upgrade:

http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/fus_rn_OL-31390-01.html

 

WLC Software upgrade Procedure:

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/68835-wlc-upgrade.html

 

Regards

Dont forget to rate helpful posts

Silver

just adding more linkshttp:/

just adding more links

http://jackstromberg.com/2014/04/tutorial-upgrading-the-firmware-on-a-cisco-5508-wireless-lan-controller/

http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn7-0.html

http://www.cisco.com/c/en/us/tech/wireless-2f-mobility/wireless-lan-wlan/tech-configuration-examples-list.html

New Member

Thank you both for the

Thank you both for the replies, I'd already got the documents for the WLC and FUS upgrade, but the tutorial really simplified it. Thanks.

264
Views
0
Helpful
3
Replies
CreatePlease to create content