I ran a debug on the WLC to capture the message when trying to use my wireless client to connect to the AP...
it keeps prompting me with my domain user name/ password.. even tho I know I typed it right... it almost seems like its not authenticating properly with my NPS service ? does it matter if I have multiple NPS service running ? basically I have 3 dhcp servers , 1 in NYC,1 in Chicago, 1 in Miami and I have NPS installed on each dhcp servers.... would this cause a problem ?
I also have 3 domain controllers... one in each site.
so here is the break down of how I had everything connected
NYC - 1 DC, DHCP - NPS , CA server, 2x 5508 WLC , 3x1142 cisco AP
Chicago - 1 DC, DHCP - NPS,
Miami - 1 DC , DHCP - NPS 3x1142 Cisco AP
here is the capture I ran from NYC trying to connect via a laptop... btw I followed the exactly way this guy had configured his WLC and NPS
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...