Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

802.11ac Wireless Bridging

Anybody bridging with 802.11ac?  What would I need to make this happen?

4 REPLIES
VIP Purple

HI,Dont forget to check:To

HI,

Dont forget to check:

To get the higher rates you have to use WPA2/AES or Open/No Auth, and WMM has to be allowed.

Regards

Dont forget to rate helpful posts

New Member

Sounds like you've done this.

Sounds like you've done this.  What I was really asking for was more of a high level.  Does Cisco have a specific model of AP that can perform 802.11ac wireless bridging?  Can it run autonomous or does it require a controller?  What types of antennas are available?

Thanks,

VIP Purple

High level :)I never used

High level :)

I never used these product but still check these:

Did not find any official document abouts products for 802.11ac bridging ...

http://www.engadget.com/2012/06/26/cisco-rolls-its-first-linksys-802-11ac-wifi-router-and-bridge/

http://www.smallnetbuilder.com/wireless/wireless-news/31802-cisco-unveils-its-draft-80211ac-router-and-bridge

 

you better ask to nearest cisco supplier about this, they can help you more in this matter.

 

Hope this helps.

Regards

Dont forget to rate helpful posts

Silver

Here is the comparision sheet

Here is the comparision sheet for all AP

http://www.cisco.com/c/en/us/products/wireless/buyers-guide.html#indoor

and here is good link for mesh deployment and every thing is explained

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-mesh/111451-indoor-mesh-deploy-guide-00.html

75
Views
0
Helpful
4
Replies