802.1x anchor mobility

[dsoltis]

Hi,

We are using the anchor mobility feature to authenticate 802.1x/WPA2 clients. We see that dhcp/data traffic traverses the Eth/IP tunnel, but do not see the authentication/radius packets. We see the authentication sourcing from the local controller. Is this how anchor mobility works or are we missing something ?

Thanx....

[andrew.prince]

The below link is a good explanation of the Anchor-Mobility function within Mobility Groups.

http://www.cisco.com/en/US/docs/wireless/controller/4.0/configuration/guide/c40mobil.html#wp1002608

HTH.