877 as Access Point

[joao]

Hi all,

i've got a 877w and i need to configure it only as a access point.Can i trunk the 877 wich my lan and pass vlans from my lan to the 877 and associate one ssid to each vlan?

IOS Version:

C870 Software (C870-ADVSECURITYK9-M), Version 12.4(4)T8.

thanks

[didyap]

Perform these steps to configure integrated routing and bridging on VLANs, beginning in global configuration mode:

1 ) bridge [number | crb | irb |mac-address-table]

2) interface name number

3) bridge-group number

4) bridge-group number parameter

5) interface name numbe

6) bridge number route protocol

7) ip address address mask

For the further description for the configuration following URL may help you ;

http://www.cisco.com/en/US/docs/routers/access/800/850/software/configuration/guide/wireless.html#wp999748