02-06-2008 04:14 AM - edited 07-03-2021 03:20 PM
Hello, I've hit a problem with a Cisco 877w dot11radio interface which is incosistent with the Cisco AP config. In summary I have 2 SSID's and 2 Vlans bridged. Association works fine to both SSID's and no connectivity issues when no encryption set. I then set a Vlan 2 Wep key then tried to vlan 1 wep key and it errors:
% Key is not accepted.
No more than 1 static key sets can be configured for Dot11Radio0
My 877 config attached as well as a config I built and works fine on a 1242 AP.
Any advice?
02-12-2008 09:32 AM
Please keep in mind that you will need the ADV. IP SERVICES feature set. The ADV security feature set will not have support for multiple VLAN's.
Here are the instructions on how to configure WEP keys for each VLAN.
1. 871#conf t
2. 871(config)#int Dot11 0
3. 871(conf-if)#encryption vlan
4. 871(conf-if)#encryption vlan
You will need to repeat step 3 & 4 for each vlan-id.
http://www.cisco.com/en/US/docs/routers/access/800/850/software/configuration/guide/wireless.html
http://www.cisco.com/en/US/docs/routers/access/1800/wireless/configuration/guide/awg.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide