06-25-2008 04:59 AM - edited 07-03-2021 04:04 PM
I noticed an ACL applied to a radio interface on our APs, and I was wondering why.
bridge-group 1 input-type-list 201
bridge-group 1 output-type-list 201
access-list 201 permit 0x8895 0x0000
access-list 201 deny 0x0000 0xFFFF
I understand the permis is an allow for some vendor and the deny is a global deny everything else, but I can't figure out what vendor frames are being allowed.
Solved! Go to Solution.
06-25-2008 01:17 PM
Never saw this before and was curious to see what it was..... I found this doc that might explain why it's there.
http://www.cisco.com/en/US/tech/tk331/tk336/technologies_tech_note09186a00800fad74.shtml
06-25-2008 01:17 PM
Never saw this before and was curious to see what it was..... I found this doc that might explain why it's there.
http://www.cisco.com/en/US/tech/tk331/tk336/technologies_tech_note09186a00800fad74.shtml
06-26-2008 07:55 AM
That actually helped quite a bite. I appreciate it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide