Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Access point seamless access

Hi,

we had configured the controller 2504 and AP

AP joini the controller as expected, but somehow user when move from one accesspoint to other they are facing issue

like getting weaker signal, not getting the signal from nearer AP.

do let us know how to resolve the issue.                  

4 REPLIES
Community Member

Re: Access point seamless access

What code are you running? What model APs? Do you have 'Client Load Balancing' enabled under WLANS > WLAN ID > Advanced?

Hall of Fame Super Silver

Re: Access point seamless access

It would be bests if you posted your show run-config and also tell us which WLAN is the issue.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Re: Access point seamless access

Please check the Minimum RSSI, Hysteresis, Scan Threshold parameters from below configurations

http://www.cisco.com/en/US/docs/wireless/controller/7.4/configuration/guides/consolidated/b_cg74_CONSOLIDATED_chapter_01100.html#ID2694

Hall of Fame Super Gold

Access point seamless access

move from one accesspoint to other they are facing issue ike getting weaker signal, not getting the signal from nearer AP.

The wireless clients decide which AP to join.  It's got nothing to do with the WLC and/or the AP.

Upgrade the wireless NIC drivers.

199
Views
0
Helpful
4
Replies
CreatePlease to create content