Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Accesspoint shouldnot join WLC

Hi

I have WLC which is having 70 accesspoint associated with it.The model num of accesspoint is 1242.But if any one from outside bring one same model of accesspoint and tried to connect it should not connect.Did any one knows how to configure the controller for this or any other option.

  • Other Wireless - Mobility Subjects
2 REPLIES
Hall of Fame Super Silver

Re: Accesspoint shouldnot join WLC

You can authorize ap via AAA server. Here is a link to look at. Hope this is what you are looking for:

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00808c7234.shtml

Thanks, Scott *****Help out other by using the rating system and marking answered questions as "Answered"*****
Hall of Fame Super Silver

Re: Accesspoint shouldnot join WLC

One other thing you can do is to make sure you remove option 43 from dhcp, remove dns entry if one was configured, remove any dhcp scope on the subnet the management and ap manager is on, disable otap on the wlc, and remove any ip-helper that is pointing to the wlc. All these features are to help LAP's find the WLC so that they can be part of your WLAN. Once your LAP's are up, there is no reason to have these still configured.

Thanks, Scott *****Help out other by using the rating system and marking answered questions as "Answered"*****
122
Views
5
Helpful
2
Replies
This widget could not be displayed.