Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ACL per SSID

Hello.

Anyone knows how to configure controll access in a WLC, per WLAN? My ideia is to apply different ACLs to different WLANs in order to controll access to assets. However I can only find pre-authentication ACL and what I want is ACLs to work after authentication.

Regards,

João.

4 REPLIES
VIP Purple

Hi,i dont it is the right

Hi,

i dont know if it is the right answer or not for u :)

Use AAA Override in the WLAN and have the ACL applied per user.

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00808b041e.shtml

 

Regards

Dont forget to rate helpful posts

New Member

Hello.Thanks for your reply

Hello.

Thanks for your reply but in my case I want to apply an ACL to a WLAN configured in local switching mode, so traffic does not pass through the WLC.

In WLAN Advanced Option there is an Override interface ACL but it is my understanding that this only apply to WLAN configured for central switching (all traffic goes through the WLC).

I would like to have the ability to apply an ACL to an WLAN (WLAN in local switching mode) for traffic control.

Regards,

João.

Cisco Employee

ACLs on the WLC are meant to

ACLs on the WLC are meant to restrict or permit wireless clients to services on its WLAN:

www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/71978-acl-wlc.html

New Member

Hello.From the document that

Hello.

From the document that you sent I believe that I cannot control traffic, per WLAN, on APs. Traffic must allways pass through the WLC (WLAN with no local switching).

Thanks and regards,

João.

438
Views
0
Helpful
4
Replies
CreatePlease login to create content