Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

adding additional dhcp scopes to a 5508 controller

Ok guys and gals. Here is my situation

I have two 5508 controllers configured with an internal dhcp scope. The scopes on each controller are a /22. I need to expand the scope to provide more addresses. Is there an easy way to add a second dhcp scope without making changes to the existing scope? If so how will the clients devices be able to access that ip address range?

Sent from Cisco Technical Support iPad App

1 REPLY

Re: adding additional dhcp scopes to a 5508 controller

there is not. You will need to change the mask on the gateway and the scope. The WLC does not support secondary addresses.

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
306
Views
0
Helpful
1
Replies