Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Adressing WLCs

I have 3 wireless lan controllers 4402, the IP Address of the Managament Interface of each WLC, it should be the same subnet than all the WLCs. For example:

WLC1 IP Management Interface 192.168.12.5

AP-Management Interface 192.168.12.6

WLC2 IP Management Interface 192.168.12.7

AP-Management Interface 192.168.12.8

WLC3 IP Management Interface 192.168.12.9

AP-Management Interface 192.168.12.11

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Adressing WLCs

Hi Ricardo,

It depends on your requirement. It is not at all mandatory to keep the management interfaces of all the controllers in same subnet.

You can very well configure mobility between all controllers even if they are in different subnet.

http://www.cisco.com/univercd/cc/td/doc/product/wireless/control/c44/ccfig40/c40mobil.htm

HTH

Ankur

*Pls rate all helpful post

2 REPLIES
Cisco Employee

Re: Adressing WLCs

Hi Ricardo,

It depends on your requirement. It is not at all mandatory to keep the management interfaces of all the controllers in same subnet.

You can very well configure mobility between all controllers even if they are in different subnet.

http://www.cisco.com/univercd/cc/td/doc/product/wireless/control/c44/ccfig40/c40mobil.htm

HTH

Ankur

*Pls rate all helpful post

Re: Adressing WLCs

123
Views
0
Helpful
2
Replies
CreatePlease to create content