Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Affect on Users When Adding SSID to AP Group

                   I just created an AP group for the first time on my 4402 controller.  When I went to add an SSID to the group, it says it will disable the WLAN.  Does that mean all users on that SSID will be disconnected?  How long would the loss of connectivity last typically?

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Affect on Users When Adding SSID to AP Group

Kevin,

The wireless for an SSID will glitch only if you make a change to that WLAN, not by adding it to an AP Group, unless you remove it.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

-Scott
*** Please rate helpful posts ***
4 REPLIES
Hall of Fame Super Silver

Affect on Users When Adding SSID to AP Group

Adding an SSID to an existing AP Group will not affect the wireless.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Affect on Users When Adding SSID to AP Group

Kevin,

The wireless for an SSID will glitch only if you make a change to that WLAN, not by adding it to an AP Group, unless you remove it.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

-Scott
*** Please rate helpful posts ***
New Member

Affect on Users When Adding SSID to AP Group

Good to know, thanks!   I guess the WLC is assuming I'm making changes when I try to add the SSID to the group.

Hall of Fame Super Silver

Affect on Users When Adding SSID to AP Group

Yeah... I add and delete ssids' all the time for testing.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

-Scott
*** Please rate helpful posts ***
226
Views
0
Helpful
4
Replies
CreatePlease login to create content