Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

After 7.0.116.0 Upgrade, Intel WiFi link cards fail

Just recently upgrade our 2 5508 controllers from 6.0.199.0 to 7.0.116.0.  Since that upgrade, I have a handful (8 to 10) of wireless laptops that now refuse to associate to any access points.  The thing these laptops all have in common is some variation of the Intel Wifi Link AGN cards.  I have about 200 other clients out there working just fine.

I've tried everything under the sun that I can think of.  Patches, drivers, the whole sh'bang. 

Is there a known issue with 7.0.116.0 and these particular cards?  I'm really stumped.

Thanks all!

  • Other Wireless - Mobility Subjects
17 REPLIES
Hall of Fame Super Gold

After 7.0.116.0 Upgrade, Intel WiFi link cards fail

Errrr .... How about try the newer 7.0.220.0?

Hall of Fame Super Silver

Re: After 7.0.116.0 Upgrade, Intel WiFi link cards fail

That is weird. So do some of the other devices that connect have these same wireless cards or have you isolated the issue to that card?

Sent from my iPhone

Thanks, Scott *****Help out other by using the rating system and marking answered questions as "Answered"*****
New Member

After 7.0.116.0 Upgrade, Intel WiFi link cards fail

Also now discovered that no Apple Airbooks can connect to the wireless now either.  Weird.

I'll see about going to the 220 code.

After 7.0.116.0 Upgrade, Intel WiFi link cards fail

Odd, I seen similar behavior. When I enabled fast ssid i noticed the devices would connect .. try that

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
Hall of Fame Super Silver

Re: After 7.0.116.0 Upgrade, Intel WiFi link cards fail

Make sure client load balancing is disabled on the WLAN SSID advanced tab on the lower right side of the page. This feature doesn't play well with Apple devices and various other laptops.

Sent from my iPhone

Thanks, Scott *****Help out other by using the rating system and marking answered questions as "Answered"*****
Cisco Employee

After 7.0.116.0 Upgrade, Intel WiFi link cards fail

Wat does the debug client say??

New Member

Re: After 7.0.116.0 Upgrade, Intel WiFi link cards fail

Do you have Aironet enabled on your SSID?

Sent from Cisco Technical Support iPhone App

New Member

Re: After 7.0.116.0 Upgrade, Intel WiFi link cards fail

'Aironet IE' is enabled on the SSID

'Client load balancing' is disabled

I tried the 'fast ssid'...no change.

I've never done a debug client...I have to be on the controller console to do that, right?

Thanks all!

Cisco Employee

Re: After 7.0.116.0 Upgrade, Intel WiFi link cards fail

Just the telnet session will do it!! console is not mandatory to run the debug

The debug will be

debug client

Regards

Surendra

961
Views
0
Helpful
17
Replies
This widget could not be displayed.