11-09-2007 11:16 AM - edited 07-03-2021 02:55 PM
Hello, i'm setting up some new ap's, connected to some 3750 access switches and 3524 access switches.
Everything seems to be okay except teh ap's connected to the ws-c3524 switch. Is there not enough sufficient poe to run these ap's on this switch? Its hard to find information as this switch model is eol.
WARNING:
All radios disabled due to insufficient inline power. Upgrade inline power source or install power injector......
11-09-2007 11:46 AM
Sorry, the AP's being used are: AIR-AP1242AG-A-K9
11-09-2007 12:07 PM
Hi Luke,
Sorry to say the AP 1240 Series can only be powered by 802.3af power capable switches :( The older 3524 will only supply Cisco pre-standard power. Here is some background info.
PoE IEE 802.3af White Paper
Hope this helps!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide