Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AIR-AP1230B-A-K9 and WS-C3524-PWR-XL

Hello, i'm setting up some new ap's, connected to some 3750 access switches and 3524 access switches.

Everything seems to be okay except teh ap's connected to the ws-c3524 switch. Is there not enough sufficient poe to run these ap's on this switch? Its hard to find information as this switch model is eol.

WARNING:

All radios disabled due to insufficient inline power. Upgrade inline power source or install power injector......

2 REPLIES
New Member

Re: AIR-AP1230B-A-K9 and WS-C3524-PWR-XL

Sorry, the AP's being used are: AIR-AP1242AG-A-K9

Hall of Fame Super Red

Re: AIR-AP1230B-A-K9 and WS-C3524-PWR-XL

Hi Luke,

Sorry to say the AP 1240 Series can only be powered by 802.3af power capable switches :( The older 3524 will only supply Cisco pre-standard power. Here is some background info.

PoE IEE 802.3af White Paper

http://www.cisco.com/en/US/netsol/ns340/ns394/ns147/ns412/networking_solutions_white_paper09186a008026641c.shtml

Hope this helps!

Rob

336
Views
0
Helpful
2
Replies