Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AIR-AP1231G-A-K9, Multiple BVI interfaces?

Is it possible to create multiple BVI interfaces and assign each of them IP addresses of different VLANs?

I have this AP and it's broadcasting 2 SSIDs (1 on VLAN1 and another on VLAN17). They work fine. The BVI 1 has IP 10.0.1.100/24 and BVI 17 has 172.17.252.100/16. The switch is 3750 and vlan1 interface has IP 10.0.1.10/24 and vlan17 interface has IP 172.17.254.10/16. However only BVI is pingable but not BVI 17. Can I use BVI 17 interface and its IP for management? Thanks!

2 REPLIES
Silver

Re: AIR-AP1231G-A-K9, Multiple BVI interfaces?

If you have vlan 1 and 17 working, then I assume you have subinterfaces for both the radio and the fast ethernet port? And each sub-interface is correctly mapped to a bridge-group of the BVI?

Maybe need to add "bridge 17 route ip"?

Post your config please?

New Member

Re: AIR-AP1231G-A-K9, Multiple BVI interfaces?

Here is the config. I can't put "bridge 17 route ip" on. It says that route ip is only allowed on bridge group 1. Thanks!

Building configuration...

Current configuration : 2090 bytes

!

version 12.3

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

service password-encryption

!

hostname ap

!

enable secret 5 $1$.CHB$zRbJ5fqZ7HG817zSv1P0k.

!

ip subnet-zero

!

!

no aaa new-model

dot11 vlan-name GN vlan 17

dot11 vlan-name Native vlan 1

!

dot11 ssid SSID_VLAN1

vlan 1

authentication open

mbssid guest-mode

!

dot11 ssid SSID_VLAN17

vlan 17

authentication open

mbssid guest-mode

!

!

!

username Cisco password 7 05280F1C2243

!

bridge irb

!

!

interface Dot11Radio0

no ip address

no ip route-cache

!

ssid SSID_VLAN1

!

ssid SSID_VLAN17

!

mbssid

speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0

station-role root

!

interface Dot11Radio0.1

encapsulation dot1Q 1 native

no ip route-cache

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

bridge-group 1 spanning-disabled

!

interface Dot11Radio0.17

encapsulation dot1Q 17

no ip route-cache

bridge-group 17

bridge-group 17 subscriber-loop-control

bridge-group 17 block-unknown-source

no bridge-group 17 source-learning

no bridge-group 17 unicast-flooding

bridge-group 17 spanning-disabled

!

interface FastEthernet0

no ip address

no ip route-cache

duplex auto

speed auto

hold-queue 160 in

!

interface FastEthernet0.1

encapsulation dot1Q 1 native

no ip route-cache

bridge-group 1

no bridge-group 1 source-learning

bridge-group 1 spanning-disabled

!

interface FastEthernet0.17

encapsulation dot1Q 17

no ip route-cache

bridge-group 17

no bridge-group 17 source-learning

bridge-group 17 spanning-disabled

!

interface BVI1

ip address 10.0.1.100 255.255.255.0

no ip route-cache

!

interface BVI17

ip address 172.17.252.100 255.255.0.0

no ip route-cache

!

ip default-gateway 10.0.1.254

ip http server

no ip http secure-server

ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag

!

!

control-plane

!

bridge 1 route ip

!

!

!

line con 0

line vty 0 4

login local

!

935
Views
0
Helpful
2
Replies