cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3503
Views
0
Helpful
20
Replies

AIR-AP1252AG-A-K9 error

raulzulueta
Level 1
Level 1

I have an AIR

-AP-1252AG-A-K9 AP connected to a WS-C3750-48-PS-S and I am getting an error:

%CDP_PD-2-POWER_LOW:  - NON_CISCO-NO_CDP_RECEIVED

What do I need to do to clear this error. The STATUS LED blinks RED.

20 Replies 20

I entered these 2 commands in the AP. I still get this error:

%CDP_PD-2-POWER_LOW:  - NON_CISCO-NO_CDP_RECEIVED  (0000.0000.0000)

What else can you suggest I try?

Thanks.

Can you please do a "sh version"?

What power source is the AP connected to?

TOR-AP1#sh ver
Cisco IOS Software, C1250 Software (C1250-K9W7-M), Version 12.4(21a)JY, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Wed 28-Apr-10 10:44 by prod_rel_team

ROM: Bootstrap program is C1250 boot loader
BOOTLDR: C1250 Boot Loader (C1250-BOOT-M) Version 12.4(10b)JA, RELEASE SOFTWARE (fc2)

TOR-AP1 uptime is 50 minutes
System returned to ROM by power-on
System image file is "flash:/c1250-k9w7-mx.124-21a.JY/c1250-k9w7-mx.124-21a.JY"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html you require further assistance please contact us by sending email to
export@cisco.com. AIR-AP1252AG-A-K9    (PowerPC 8349) processor (revision A0) with 49142K/16384K bytes of memory.
Processor board ID FTX1209901E
PowerPC 8349 CPU at 533Mhz, revision number 0x0011
Last reset from power-on
1 Gigabit Ethernet interface
2 802.11 Radio(s)

If

cisco

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:1E:F7:1A:C0:BA
Part Number                          : 73-10425-05
PCA Assembly Number                  : 800-27630-05
PCA Revision Number                  : A0
PCB Serial Number                    : FOC12071EBM
Top Assembly Part Number             : 800-29039-01
Top Assembly Serial Number           : FTX1209901E
Top Revision Number                  : A0
Product/Model Number                 : AIR-AP1252AG-A-K9

Configuration register is 0xF

TOR-AP1#

It is connected to a C3750-48PS-S switch with PoE

Can you reboot the AP and post the show logs after about 5 minutes (takes time for the radios to come up) as well as "sh ip int brief"?

I finally got the IOS loaded. Thanks.

Hello.

good news that your problem is sovled.

can you please let us know what did you do in order to solve the problem?

where was the problem?

Thanks.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: