AIR-CAP3702E-A-K9and WLC5508

[Robin Swan]

Hello,

I have a 5508 WLC with the 7.6.120.0 Software Version.  I connect some new, out-of-the-box AIR-CAP3702E-A-K9 AP's and they show:

CleanAir Admin Status = Enable

CleanAir Oper Status = DOWN

When I go to the "Wireless" Tab, then to "Radios" on the menu and select "Configure" on the AP, CleanAir Admin Status is on "Enable."

Does this mean that the AP is doing the CleanAir?

Thank you in advance.

[Leo Laohoo]

Is CleanAir enabled GLOBALLY?  

Wireless > 802.11a > CleanAir and is it ticked?

[Moin Ilyas]

Please refer: http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-0/configuration-guide/b_cg80/b_cg80_chapter_010000101.html

Hope that helps.