Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AIR-CT2504 and CAP3602I

Hello to all,

I am doing an new wireless lan deployment.

i configured all the switchces and WLAN controller as per document.

When I tried to connect the AP to associate with the WLC, I am getting the error below.

Ping communication between the AP and the WLC is fine.

I am getting the error below from the AP:

*Apr 21 14:15:20.039: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'PRJ-WLC01'running version 7.0.220.0 is rejected.

*Apr 21 14:15:20.039: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.

*Apr 21 14:15:20.039: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.

*Apr 21 14:15:20.039: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller

*Apr 21 14:15:20.039: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 192.168.200.10

Pls let me know if you need additional information.

Thanks in advance.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: AIR-CT2504 and CAP3602I

Apr 21 14:15:20.039: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'PRJ-WLC01'running version 7.0.220.0 is rejected.

1.  Upgrade the firmware of your WLC to 7.1.91.0.

Software Release Support for Access Points

 Apr 21 14:15:20.039

2.  Make sure the time and date of the WLC is correct or synchronized to a valid time source.

1 REPLY
Hall of Fame Super Gold

Re: AIR-CT2504 and CAP3602I

Apr 21 14:15:20.039: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'PRJ-WLC01'running version 7.0.220.0 is rejected.

1.  Upgrade the firmware of your WLC to 7.1.91.0.

Software Release Support for Access Points

 Apr 21 14:15:20.039

2.  Make sure the time and date of the WLC is correct or synchronized to a valid time source.

110
Views
0
Helpful
1
Replies