Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AIR-LAP1131AG-C-K9 Radio 802.11b could not be enable

I've a 2106 WLC and the software is upgrade to 7.0.220.0. There are 3 APs with external power adapter work normally on it.

Here is the problem:

There is another AP with external power adapter has join the the WLC successfully. But it can not enable the radio 802.11b. Following is the error message on CLI, What could be the reason and solution for it? Thanks a lot!

(Cisco Controller) config>802.11b enable AP001d.a1ef.b5f4

Cisco AP has not enough in-line power to enable radio

5 REPLIES
Cisco Employee

AIR-LAP1131AG-C-K9 Radio 802.11b could not be enable

Go that AP from the WLC

WLC GUI >> WIreless >> AP >> AP Edit >> Advanced >> We see Power inline or power injector..

Please fiddle around this and see if that helps!!

Regards

Surendra

New Member

AIR-LAP1131AG-C-K9 Radio 802.11b could not be enable

It is still not work.

Following is my step:

     1. I selected "Power Injector State"

     2. There is 2 selection for "Power Injector Selection". "installed"and"override". I've tried them both.

Please help~

Thank you!

Hall of Fame Super Gold

AIR-LAP1131AG-C-K9 Radio 802.11b could not be enable

Please post the output to the following command:

WAP:

1.  sh version;

2.  sh inventory

WLC:

1.  sh sysinfo

Next, attach a console cable to the WAP and reboot the WAP.  Post the entire bootup process including the JOIN process.

New Member

Re: AIR-LAP1131AG-C-K9 Radio 802.11b could not be enable

WAP

1. sh version

AP001d.a1ef.b5f4#show version  
Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(23c)JA3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Tue 18-Oct-11 15:07 by prod_rel_team

ROM: Bootstrap program is C1130 boot loader
BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)

AP001d.a1ef.b5f4 uptime is 43 minutes
System returned to ROM by power-on
System image file is "flash:/c1130-k9w8-mx.124-23c.JA3/c1130-k9w8-mx.124-23c.JA3"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-LAP1131AG-C-K9   (PowerPCElvis) processor (revision A0) with 27638K/5120K bytes of memory.
Processor board ID FOC11520JRM
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 7.0.220.0
1 FastEthernet interface
2 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:1D:A1:EF:B5:F4
Part Number                          : 73-8962-12
PCA Assembly Number                  : 800-24818-11
PCA Revision Number                  : B0
PCB Serial Number                    : FOC11520JRM
Top Assembly Part Number             : 800-29144-02
Top Assembly Serial Number           : FOC11520JRM
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131AG-C-K9 

Configuration register is 0xF

2. sh inventory

AP001d.a1ef.b5f4#show inventory

NAME: "AP1130", DESCR: "Cisco Aironet 1130 Series (IEEE 802.11a/g) Access Point"

PID: AIR-LAP1131AG-C-K9, VID: V04, SN: FOC11520JRM

WLC

1. sh sysinfo

(Cisco Controller) >show sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.0.220.0
RTOS Version..................................... 7.0.220.0
Bootloader Version............................... 4.0.191.0
Emergency Image Version.......................... N/A
Build Type....................................... DATA + WPS

System Name...................................... WLC
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.828
IP Address....................................... 10.51.132.246
System Up Time................................... 0 days 20 hrs 13 mins 55 secs
System Timezone Location.........................

Configured Country............................... CN  - China
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +52 C


--More-- or (q)uit
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Disabled
Number of WLANs.................................. 3
Number of Active Clients......................... 74

Burned-in MAC Address............................ 00:1E:13:50:93:C0
Maximum number of APs supported.................. 6

AP001d.a1ef.b5f4#show inventory
NAME: "AP1130", DESCR: "Cisco Aironet 1130 Series (IEEE 802.11a/g) Access Point"
PID: AIR-LAP1131AG-C-K9, VID: V04, SN: FOC11520JRM

I'll try to get console log later because I could just access the AP remotly at this moment.

By the way, I've tried to replace this AP with another one which could work normally in another room. It doesn't work as the first one. Is it possibel for the switch's prolbem?

Thanks a looooooooot!

Hall of Fame Super Gold

AIR-LAP1131AG-C-K9 Radio 802.11b could not be enable

Depends.  One of the few times I've seen the radios going down is when you combine power injector to, say, a 2940/2950 switch.  Not certain until you console and reboot the WAP.

Your output doesn't have anything unusual. 

1150
Views
0
Helpful
5
Replies