We have 3 new AIR-LAP1131AG access points connecting to 4400 controller with software version 220.127.116.11. The access points connect to the controller and start downloading their software. After a few minutes the access points reboots and starts over. Below is information from the trap logs.
Fri Jun 12 10:48:46 2009 AP Associated. Base Radio MAC: 00:14:1b:b7:90:e0
1 Fri Jun 12 10:48:21 2009 AP Disassociated. Base Radio MAC:00:14:1b:b7:90:e0
2 Fri Jun 12 10:48:21 2009 AP's Interface:1(802.11a) Operation State Down: Base Radio MAC:00:14:1b:b7:90:e0 Cause=Heartbeat Timeout
3 Fri Jun 12 10:48:21 2009 AP's Interface:0(802.11b) Operation State Down: Base Radio MAC:00:14:1b:b7:90:e0 Cause=Heartbeat Timeout
Does anyone have an idea what could be causing this problem.
We recently ran into this. If you are using LAG on your WLC; make sure you have a port channel configured on your connecting switch. An easy way to see what is going on is to telnet into the WLC and enable debug "debug lwapp events enable" With this we saw an error message "packet 3 received, packet 4 expected"
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...