AIR-PCMCIA350

[d.celestino]

Good evening,

I need a wireless PC card software for my AIR-PCMCIA350. I can't use the Windows XP wireless client because I setup my Wireless AP to use WPA-Personal and XP doesn't support that encryption.

I would like to setup this card on my IBM 560 portable, however, I don't have the software. I did check CISCO downloads but I don't see the wireless PC card client software specific for the PCMCIA350. I only see one for the 340.

Any help or direction is most appreciated.

Thanks,

Deb

[Lucien Avramov]

http://www.network-drivers.com/drivers/125/125907.htm

On cisco.com:

http://tools.cisco.com/support/downloads/go/Model.x?mdfid=279979447&mdfLevel=Model&treeName=Wireless&modelName=Cisco%20Aironet%20350%20Mini-PCI%20Wireless%20LAN%20Client%20Adapter&treeMdfId=278875243

or :

http://tools.cisco.com/support/downloads/go/Model.x?mdfid=268438202&mdfLevel=Model&treeName=Wireless&modelName=Cisco%20Aironet%20350%20Wireless%20LAN%20Client%20Adapter&treeMdfId=278875243

Either one I believe should work.

Give it a try.

If the driver is not good, you can use my first link

[d.celestino]

Thanks lavramov for your quick response.

I will let you know if it worked.

Deb

[d.celestino]

Hello lavramov,

I downloaded and ran the 350 PC card series bundled (PCM driver, Firmware 350-PCM and Utility-ACU 5.05.001)

My 350 PC card driver version 8.2.3.0 3/19/2002

My Firmware version is V4.25.30

My ACU Utility is 5.05.00

I also updated my Linksys Wireless WRT54G firmware to v1.02.6

However, when I try to create a profile in ACU Profile Manager it displays Not Associated.

Here are my HOME profile settings:

I checked Include Profile In Auto Profile

I entered my SSID name of my Linksys Router

I took the default CAM and Infrastruture

I took the default Auto Rate Selection

I have checked all Use Short Radio Headers, World Mode and Periodically...

I accepted all the defaults for RF Network

I accepted the defaults for Advanced(Infrastruture)

For Network Security Tab:

I selected Host Based EAP

No WEP

I checked the Alow Association to Mixed Cells

HOWEVER, it doesn't connect. Any help would be much appreciated.

Thanks,

Deb