AIR-SSB350-E-K9 replaceable with AIR-3602-E-K9 ?

[Xiao Yi Steven FAN]

Dear all,

i 'm wondering whether the AIR-SSB350-E-K9 is replaceable with AIR-3602-E-K9? 

currently the 2 AIR-SSB350-E-K9 are used for outdoor bridge purpose so it is working with cisco Aironet 13.5-dBi Yagi Mast Mount Antenna (AIR-ANT1949), appreicate your help. thanks

[Scott Fella]

If your looking at a bridge replacement using the same antenna, your better off using a 1242. It's a waste of money to use a 3602, 2602 or any other model if you ask me. If your looking for a true bridge, then look at the Exalt r5005 which Cisco resells.

Sent from Cisco Technical Support iPhone App

[Xiao Yi Steven FAN]

thanks for your reply, the issue here is sales already ordered the 3602-E , currently cisco Aironet 13.5-dBi Yagi Mast Mount Antenna (AIR-ANT1949) has only 2 interfaces connector but 3602E has 4 interfaces not sure whether it is compatiable with each other?

[Scott Fella]

Well you can use it, you just have to disable the other three ports and set which port is your primary TX and RX. Also you will have to convert those access point to autonomous as most likely they are lightweight. To convert, here are some links

Using a TFTP Server to Return to a Previous Release

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

https://supportforums.cisco.com/docs/DOC-18268

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

http://www.youtube.com/watch?v=QQ_NuxdRhQ4

https://supportforums.cisco.com/docs/DOC-14960

Sent from Cisco Technical Support iPhone App

[Xiao Yi Steven FAN]

Scott thanks for the tips will work on it.

[Scott Fella]

No problem

Sent from Cisco Technical Support iPhone App