Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AireOS 8 - Network Lists for Split Tunneling

Hi all,

 

I just wanted to ask, if anybody could shed some light on this newly introduced feature seen in the screenshot?
What does it do? What are those lists bound to? etc.

I didn't find anything in the configuration guide. It sounds VPN related, because for OEAPs the split tunneling is done separately AFAIK. Could still be intertwined with each other though.

 

Regards,

Patrick

 

 

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Hi Patrick,It is looks like

Hi Patrick,

It is looks like for OEAP ACLs. You can defined your corporate network subnets as part of network list & then you can recall them.

Below from page 828 of the WLC 8.0 Configuration Guide

From the Destination drop-down list, choose one of these options to specify the destination of the packets to which this ACL applies:
• Any—Any destination (This is the default value.)
• IP Address—A specific destination. If you choose this option, enter the IPaddress and netmask of the destination in the text boxes.
Network List—A specific network list. If you choose this option, enter the corporate subnets configured in the network list

 

HTH

Rasika

**** Pls rate all useful responses ****

2 REPLIES
VIP Purple

Hi Patrick,It is looks like

Hi Patrick,

It is looks like for OEAP ACLs. You can defined your corporate network subnets as part of network list & then you can recall them.

Below from page 828 of the WLC 8.0 Configuration Guide

From the Destination drop-down list, choose one of these options to specify the destination of the packets to which this ACL applies:
• Any—Any destination (This is the default value.)
• IP Address—A specific destination. If you choose this option, enter the IPaddress and netmask of the destination in the text boxes.
Network List—A specific network list. If you choose this option, enter the corporate subnets configured in the network list

 

HTH

Rasika

**** Pls rate all useful responses ****

New Member

Hi Rasika, thanks for the

Hi Rasika,

thanks for the find. Hopefully there will be an update to include more detailed information on those lists.

 

Regards,

Patrick

79
Views
0
Helpful
2
Replies
CreatePlease login to create content