Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Aironet 1100 - Backing up and Restoring Setup & Config

can one explain the easiest way to back-up and restore the setup configuration of an Aironet 1100 AP? Can this not be done through the web inteface like other manufacturers? can this only be done through a Hyper terminal session? Any help would be greatly appreciated. Thanks.

1 REPLY
Community Member

Re: Aironet 1100 - Backing up and Restoring Setup & Config

Setup the Encryption Manager

Enable Cipher for TKIP.

Clear the value in Key 1.

Set Encryption Key 2 as the Transmit Key.

Click the Apply-Radio# button.

Setup the SSID Manager

Select the desired SSID from Current SSID List.

Choose an appropriate authentication method, by which type of client cards used. If EAP worked prior to the addition of WPA, you should not require change.

Enable key management. First choose Mandatory from the pulldown box, then check the box to choose WPA.

Click Apply-Radio

345
Views
0
Helpful
1
Replies
CreatePlease to create content