Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Aironet 1200 droping AP in client mode

This is an update of a previous post .

I have a aironet 1230 B and he is dropping clients and i´ve found that he is only dropping AP´s in client mode and only the D-link 900+ ,there are other D-link Ap in client mode and don´t have this problem .

I've disabled the aironet extensions ,and increased the packet retries ,but it's not stable ,he dropps the 900+.

This clients have -72 dbm 88% signal quality.

If some one has any Aironet with D-link 900+ as clients and had a simillar please leave reply.

Thanks.

PS:using the latest firmware

1 REPLY
Silver

Re: Aironet 1200 droping AP in client mode

To the best of my knowledge, the behaviour of AP will differ from one vendor to another vendor.

This document provides a sample configuration that shows how to set up a basic wireless LAN (WLAN) connection with the use of a Cisco Aironet Access Point (AP) and computers with Cisco-compatible client adapters. The example uses the GUI.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008055c39a.shtml

324
Views
0
Helpful
1
Replies