Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Aironet 1200 series Access point with Elektron server configuration

I am using Elektron server for WPA authentication for my Cisco Aironet 1200 series Access Points.

If some Buddy having a related documentaion Please forward it to me on skumar@locuz.com or satishjawla@yahoo.co.in

1 REPLY
Silver

Re: Aironet 1200 series Access point with Elektron server config

Elektron involves a very simple installation under Mac OS X and Windows. After installation, the Elektron Settings application controls the server's features. Each access point on a network must be configured to point to the Elektron server, which needs to be installed on a machine that has a static IP address, although for LANs, this address can be a private NAT address. The Access Points pane of the settings program lets you enter a shared password which is then used on each access point to exchange data with Elektron.The Restrict Access Points to Local Network checkbox when checked keeps Elektron local; uncheck it, and remote offices can use Elektron for authentication. But remember that a routable IP address is needed in that configuration, that you're opening up Elektron to potential external attack, and that losing Internet access in a remote location means losing all subsequent access to the WLAN--users that have authenticated can remain on the network but new users can't join until access is restored.

107
Views
0
Helpful
1
Replies