The 1200 series AP's do support WPA2. Have a look at the following;
The Cisco Aironet 1200AG Series has achieved National Institute of Standards and Technology (NIST) FIPS 140-2 level 2 validation and is in process for Common Criteria validation under the National Information Assurance Partnership (NIAP) program. The Cisco Aironet 1200 Series supports 802.11i, Wi-Fi Protected Access 2 (WPA2), WPA, and numerous Extensible Authentication Protocol (EAP) types. WPA and WPA2 are the Wi-Fi Alliance certifications for interoperable, standards-based wireless LAN security. These certifications support IEEE 802.1X for user-based authentication, Temporal Key Integrity Protocol (TKIP) for WPA encryption, and Advanced Encryption Standard (AES) for WPA2 encryption. These certifications help to ensure interoperability between Wi-Fi-certified wireless LAN devices from different manufacturers.
Q. What Cisco Aironet access points support WPA2 and AES?
A. The following Cisco Aironet autonomous and lightweight access points support WPA2 and AES: Cisco Aironet 1240AG Series, 1230AG Series, 1130AG Series and 1000 Series access points. Cisco Aironet 1100 Series, 1200 Series and 1300 Series 802.11g radios support WPA2 with a Cisco IOS Software upgrade via Cisco IOS Software Release 12.3(2)JA or later.
From this doc;
Cisco Wi-Fi Protected Access, WPA2 AND IEEE 802.11I
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...