I have an interesting problem. I have an aironet 1250. For months my wireless clients has been connecting with no problems. One day there was a power failure, don't remember making any chnages which I should of saved. After, all of my equipment rebooted with no problems. Now I'm seeing my 802.11N clients having connectivity problems. After 10 to 40 mins I believe they get logout, but the client don't get updated to this. The G and the B no problems. Some are Intel chip sets and some are apples base computers.
Anyone seen this?
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
aaa group server radius rad_eap
aaa group server radius rad_mac
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authorization exec default local
aaa accounting network acct_methods start-stop group rad_acct
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...