I have an aironet 1252 access point and I have it set up with 3 ssid's which in turn are 3 separate vlans. My question is, can the 1250 supply dhcp to each ssid or only to the native vlan. This access point is going to be connected to a 4507 routing switch. Currently I am unable to obtain any dhcp addresses. The port that the access point is connected to is a trunk port and is configure to only allow the 3 vlans that are on the access point. Any help would be greatly appreciated
We are moving! Please use WLCCA Forum for updates and discussions
[toc:faq] Wireless LAN Controller (WLC) Config Analyzer Download Click
here to Download To request access, send an e-mail to
firstname.lastname@example.org. Please include your Cisco.com userna...
[toc:faq] IntroductionHere is the step by step process that we have to
take care of while converting LWAPP to IOS and then vice versa..LWAPP to
IOSThe hardware used = 1141 AP (make sure we are using the right
[toc:faq] Introduction AnyConnect Secure Mobility Client 3.0: Network
Access Manager & Profile Editor on Windows Summary Use the Cisco
AnyConnect Network Access Manager Profile Editor to build custom
profiles for the AnyConnect Secure Mobility Client. App...