Hello, I have problem in this wirelles router. How to enable web interface via the console? (Port COM1) Command Ip http server is bad.System say unknown command,Why? This device is new.Start device: I hold mode button and switch on power supply.LED is now blinking RED.Take username Cisco and password Cisco and next write command Ip http server,bad is wrong. I work with cisco devices before 4 years, I forgot instrutions for configure
You have a LAP1262 which means you need a wireless LAN controller to manage that. That command will not work on those type of access point. If you want a stand alone access point, the model would of been AP1262. So if you want this AP to be stand alone device you will need to convert this from capwap to autonomous. Follow the directions below. You will need to download the 1260 autonomous code from Cisco.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...