Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Aironet 1310 errors...

Hi,

we have got two ofices in different area. We decided to connect them with two AP's Aironet 1310 with mode point-to-point bridge. We have voice traffic over this wi-fi channel. If we use IOS 12.3(4)-JA we have noticed many errors in the logs 1310 such as "DOT11-4-MAXRETRIES: Packet to client [mac] reached max retries, remove

the client" or "DOT11-4-UPLINK_LINK_DOWN: Interface Dot11Radio0, parent lost: To many retries". The connection betwen AP's is down at regular intervals and not established again. The connection has upped only after disconnect and reconnect the power injector power jack. Time to response is less than 100 ms for ping. We have changed IOS ver 12.3(8)-JA2 and unfortunately it doesn't help, though the errors has noticed less, but Time to response is between 70 ms and 5000 ms. It is too bad for normal work in our ofices, we wanted to have Time to response about 50 ms. Could you advise something?

Thanks.

1 REPLY
Silver

Re: Aironet 1310 errors...

Packet to client MAC reached max retries, remove the client" is happened when your client try to associate AP which doesn't support client function correctly (usually authentication type doesn'tmatch).

135
Views
0
Helpful
1
Replies
CreatePlease login to create content