Welcome to Cisco Support Community. We would love to have your feedback.
For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.
I have tried to upgrade VxWorks to IOS and by mistake uploaded AP-Upgrade-Image. After restart it gives me the following:
Cisco IOS automatic field upgrade image, ESC to terminate
upgrade: Compare ok first load file 0
upgrade: Compare ok first load file 1
upgrade: Compare ok first load file 3
upgrade: IOS Configuration component not available
upgrade: Invalid or missing installation key (BR350 not supported)!
Depress ESC key to reboot
Now BR350 has the following files:
Memory Bank total used left
DRAM 16738168 0 16738168
Config 524288 628 523660
FLASH 7733248 4291344 3441904
Memory Bank:File address size encoding type flags
a) Config:BR Installation Key FE020000 64 none Key 0000
b) Config:VAR Installation Key FE020040 52 none Key 0000
c) Config:AWC_ConfigDB FE020074 512 AiroDB1 Data 0000
d) FLASH :IOS_Upgrade 1.0 FE0A0000 393268 none Exec 0801
e) FLASH :IOS_C350_BOOT 2 FE100034 393256 none 0x09 0800
f) FLASH :IOS_C350_TAR 2 FE16005C 3467304 none 0x0A 0800
g) FLASH :IOS_Upgrade_Envs 1.0 FE4AE884 136 none 0x0C 0800
h) FLASH :AWC PCMCIA FPGA 0.14 FE4AE90C 37380 none FPGA 0000
When I press Ctrl+W I have the following options:
c -- Copy file
f -- File dir
l -- downLoad file into DRAM
u -- Upload file
p -- xfer Protocol
n -- coNsole
r -- Run
s -- System info.
I can't copy to Flash. When I copy to DRAM Vxworks image file and try to run
Any chance to fix it?
When I copy to DRAM Vxworks image file and try to run it gives me error on decompressing image.
How can I manualy decompress .img file?