How do I configure the aironet 350 AP and Airport to connect to my provider's(Verizon DSL) PPPoE connection?
The airport sees the aironet access point. But I can't enable the PPPoE connection. The web interface to the aironet configuration shows up. Should I set the AIRONET in cable DSL modem mode or the connection mode(it lists three options - I forget the third option). The airport admin utility doesn't show the aironet base station to configure.
Apple iBook with G3 processor running OS X 10.1.1 with airport(wireless client from Apple - I believe Lucent makes those :-(
Trying to connect to Aironet 340(you are right again! - it's not 350) base station. The aironet is connected to the DSL modem. I downloaded the mac utility but that doesn't detect the basestation. The browser sees it okay. I read somewhere that aironet extensions need to be turned off.
I will try to connect to the LAN using the basestation first at work. If airport and basestattion talk, I will worry about DSL later.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...