Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Aironet AP 3600 Series Installation details

Hi team

 

 

  Here  I am trying to configure AIR-CAP3602I-N-K9  as standalone  for Demo purpose,but it could be not able to access via GUI, could you some body help me to get the first time installation for the same 

 

thanks

Sreejesh s

 

  • Other Wireless - Mobility Subjects
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

The part number you've quoted

The part number you've quoted means the AP is running controller-based IOS.  This is why you won't be able to access GUI without a WLC.

3 REPLIES
Hall of Fame Super Gold

The part number you've quoted

The part number you've quoted means the AP is running controller-based IOS.  This is why you won't be able to access GUI without a WLC.

VIP Purple

As leo mentioned, you must

As leo mentioned, you must convert it to Autonomous then only you can configure it.

Paste the info from AP: sh version

LAP to AAP conversion:

http://rscciew.wordpress.com/2014/05/07/access-point-conversion-lap-to-aap-and-vice-versa/

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

Then to configure:

http://rscciew.wordpress.com/2014/05/24/single-ssid-configuration-on-autonomous-ap/

 

Regards

 

Gold

for  Troubleshooting

for  Troubleshooting Lightweight Access Points follow the process: www.cisco.com/c/en/us/td/docs/wireless/access_point/1100/installation/guide/110h_c6.html

 

280
Views
0
Helpful
3
Replies