Solved: Aironet Power Injector -Air-Pwrinj-Blr2=

seanvinson34 · ‎11-12-2013

I am working with a Aironet Power Injector (Air-Pwrinj-Blr2=) trying to connect it to the access point it comes with to a desktop running Windows XP. I am able to connected to it and use cli commands via hyper terminal, but I am not able to get a network signal to the desktop. I was able to find the IP address or what I assume is the ip address, but can't ping it from inside the office and I am not able to use the ip address to get a connection to the power injector via browser. Has anybody worked with one of these units before this is a first for me and I am hoping somebody can steer me in the right direction and get this working. The Ethernet, Status and Radio are all blinking green lights on the access point and the Install is not used on this model so no light there. Thanks in advance for any help provided!

Saurav Lodh · ‎11-15-2013

Please find the quick guide for Cisco power injectors

http://www.cisco.com/en/US/docs/wireless/power/quick/guide/pinjcomb.html

View solution in original post

David Ritter · ‎11-22-2013

Cisco Power Injectors do not have a network presents. What you get is that of the device on the end.

In this case the BR1310 in an out-of-box mode will come up at 10.0.0.1, unless it gets a DHCP responce.

If not, do a reset..

HTML into the GUI is a lot simpler. I use them in pairs. The client side should be in non-root bridge mode lookin for mate in root bridge mode.

View solution in original post

David Ritter · ‎12-16-2013

you say you can cli into the unit?

what IOS version? must be C1310-K9W7-M. that is the standalone version of the code rather than the light-weight version.

what do you get from a dir flash: req?

Directory of flash:/

    2 -rwx         172 Feb 28 2002 16:00:07 -08:00 env_vars
    4 drwx         256 Dec 31 1969 16:06:11 -08:00 c1310-k9w7-mx.123-8.JEA3
152 -rwx        1947 Feb 19 2013 18:49:02 -08:00 private-config
153 -rwx        4185 Feb 19 2013 18:49:02 -08:00 config.txt
154 -rwx        1048 Feb 19 2013 18:49:02 -08:00 private-multiple-fs

what do you get from a

dir flash:c1310-k9w7-mx.123-8.JEA3
Directory of flash:/c1310-k9w7-mx.123-8.JEA3/

    5 drwx          64 Dec 31 1969 16:00:44 -08:00 html
149 -rwx     4146048 Dec 31 1969 16:06:06 -08:00 c1310-k9w7-mx.123-8.JEA3
150 -rwx      131328 Dec 31 1969 16:06:11 -08:00 5501.img
151 -rwx         277 Dec 31 1969 16:06:11 -08:00 info

You might need to do IOS upgrade or refresh..

View solution in original post

David Ritter · ‎01-13-2014

Looks pritty much like mine, just newer.. unless something was corrupt..

It does actuall load/mount the IOS right?

what error do you get when you http://10.0.0.1 ?

the device does a sh tech? seems to function cli mode fine?

You might need to open a TAC on it.. I just have a few and know the injector is just a media converter... UTP cat5 to duplex coax (imho thin-net style).

View solution in original post

David Ritter · ‎01-14-2014

Sean,

My gut feeling is that a file is missing in the html folder..

The first screen that I get is the: server requests logon and if I cancel I get the 401 not authorized error.

In you config, ip http server is enabled, followed by the no secure http server entry..

If you have your working unit, you could compare file counts in the html directory.

However a reinstall of the .tar file might be in order.

View solution in original post

Scott Fella · ‎01-15-2014

Check the MD5 hash also to make sure the file didn't get corrupted when you were downloading it.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***

View solution in original post

David Ritter · ‎01-15-2014

check this thread:

https://supportforums.cisco.com/thread/2149517

I suspect you should have a c1300-k9w7-tar

View solution in original post

David Ritter · ‎01-16-2014

blinking green status light means that the device is not linked to a mate.

A root bridge turns on in TX mode, shouting for one (or more) non-roots to answer.

A non-root bridge turns on in RX mode, listening for its matching root before anouncing its presents.

I usually setup the pair on the bench so I don't have antenna and power issues.

the c1310-rcvk9w8-tar is the lightweight CAPWAP version of the code.

you need that k9w7-tar to load.

Yes I sometimes trouble getting the syntax of the tftp statement right.

View solution in original post

David Ritter · ‎01-16-2014

config.text does not exist until the first time the running config is saved to start.

I confess I have never looked at the power-injector data. I have been luck, my toys seem to work.

I have 4 pr 1231's in bridge mode

2 pr 1310's

6 pr 1410's

236 ap's

20 oeap's.

what does the your tftp server log record when the 1310 reaches out to retreive the file?

View solution in original post

David Ritter · ‎01-21-2014

Where is the 1310 that went with the power injector?

As was mentioned before, the power injector has no intelligence or ability to talk. It just converts UTP ethernet to Thin-net ethernet protocol and adds 48 volts.

The serial number presented in both captures was FTX1220U0G1.. same radio, same IOS.

View solution in original post

Rasika Nayanajith · ‎01-21-2014

Hi Sean,

First make sure your BVI1 interface has 10.0.0.1 IP. If not you can easily set it like below. Then set your PC ip as default gateway.

ap(config)#int bvi1

ap(config-if)#ip address 10.0.0.1 255.255.255.0

ap(config)#ip default-gateway 10.0.0.2

Once you do this & set your PC to 10.0.0.2 with mask 255.255.255.0 & gateway 10.0.0.1 you should be able to ping AP IP. Once rechability is confirmed you can run a TFTP server on your PC & then upload the new image to 1310.

ap#archive download-sw /overwrite /force-reload tftp://10.0.0.2/c1310-k9w7-tar.123-8.JEA3.tar

Also if possible upgrade to this code c1310-k9w7-tar.124-25d.JA2.tar

HTH

Rasika

**** Pls rate all useful responses ****

View solution in original post

Rasika Nayanajith · ‎01-23-2014

Hi Sean,

That's great, you achieved a big success . Your current code should be fine as it is 12.4-25d-JA

Regarding your next query, if you want to create a SSID to connect wireless clients in the simplest way, then you can copy & paste below config (with the modified SSID name & password) & connect this AP to a switchport where DHCP enabled, users will be able to get IP on that DHCP subnet.

dot11 ssid TEST

authentication open

authentication key-management wpa version 2

guest-mode

wpa-psk ascii Cisco123

!

interface Dot11Radio0

encryption mode ciphers aes-ccm

ssid TEST

no shutdown

!

interface BVI1

ip address dhcp

If your requirement is little different pls let me know.

By the way thanks for rating the resposne as well.

HTH

Rasika

**** Pls rate all useful response ***

View solution in original post

Rasika Nayanajith · ‎01-23-2014

Hi Sean,

Reading further your original query , I think you requirement is different & my proposed solution may not work for you to fulfill that.

Pls clarify if this is what you want ? (wired desktop connect through 1310 to your wireless network)

Desktop -> 1310 (ethernet) -> 1310 (Radio) -> Wireless AP -> Rest of your wired Network

Then I can help you accordingly

HTH

Rasika

**** Pls rate all useful resposnes ****

View solution in original post

Rasika Nayanajith · ‎01-24-2014

Hi Sean,

Thanks for the clarification. One more question, your main facility wireless network is managed via a WLC or you have autonomous AP for that.

If you are using Autonomous AP with PSK then you can configure the 1310 with same pre-shared key (below example is valid if you are using WPA2/AES & PSK as Cisco123). If you use any other security than this you have to configure your 1310 accordingly. Then depend on the your main facility wireless network configuration your desktop should get a DHCP IP from that range.

hostname 1310-WGB

!

dot11 ssid TEST

authentication open

authentication key-management wpa version 2

wpa-psk ascii Cisco123

!

interface Dot11Radio0

encryption mode ciphers aes-ccm

ssid TEST

station-role workgroup-bridge

no shutdown

!

interface BVI1

ip address dhcp

If your set up is different or you may need further assistance I am happy to remotely looking into this if you can give me remote access via Teamviewer or something else.

HTH

Rasika

**** Pls rate all useful responses ****

View solution in original post

Saurav Lodh · ‎11-15-2013

Please find the quick guide for Cisco power injectors

http://www.cisco.com/en/US/docs/wireless/power/quick/guide/pinjcomb.html

seanvinson34 · ‎11-20-2013

Thanks Saurav!

I've been using this manual

http://www.cisco.com/en/US/docs/wireless/access_point/1300/installation/guide/1300hig_book.pdf

I'm just not that familiar with the Cisco power injector and navigating its cli to get it to work.

I have been doing the install steps as suggested but still not getting any network connection via

the access point.

Thanks again for responding, not sure if you can take a look at the manual and provide feed back or not, but any help is much appreciated.

Sean

Leo Laohoo · ‎11-20-2013

What is the model of the AP?

seanvinson34 · ‎11-21-2013

AIR BR 1310G

David Ritter · ‎11-22-2013

Cisco Power Injectors do not have a network presents. What you get is that of the device on the end.

In this case the BR1310 in an out-of-box mode will come up at 10.0.0.1, unless it gets a DHCP responce.

If not, do a reset..

HTML into the GUI is a lot simpler. I use them in pairs. The client side should be in non-root bridge mode lookin for mate in root bridge mode.

seanvinson34 · ‎12-13-2013

I have reset the unit, but unfortunately I'm not able to the html gui to configure.

Any other steps I can take?

Thanks for your help!

David Ritter · ‎12-16-2013

you say you can cli into the unit?

what IOS version? must be C1310-K9W7-M. that is the standalone version of the code rather than the light-weight version.

what do you get from a dir flash: req?

Directory of flash:/

    2 -rwx         172 Feb 28 2002 16:00:07 -08:00 env_vars
    4 drwx         256 Dec 31 1969 16:06:11 -08:00 c1310-k9w7-mx.123-8.JEA3
152 -rwx        1947 Feb 19 2013 18:49:02 -08:00 private-config
153 -rwx        4185 Feb 19 2013 18:49:02 -08:00 config.txt
154 -rwx        1048 Feb 19 2013 18:49:02 -08:00 private-multiple-fs

what do you get from a

dir flash:c1310-k9w7-mx.123-8.JEA3
Directory of flash:/c1310-k9w7-mx.123-8.JEA3/

    5 drwx          64 Dec 31 1969 16:00:44 -08:00 html
149 -rwx     4146048 Dec 31 1969 16:06:06 -08:00 c1310-k9w7-mx.123-8.JEA3
150 -rwx      131328 Dec 31 1969 16:06:11 -08:00 5501.img
151 -rwx         277 Dec 31 1969 16:06:11 -08:00 info

You might need to do IOS upgrade or refresh..

seanvinson34 · ‎01-10-2014

I have 3 other photos but they are to big to upload to this forum

David Ritter · ‎01-13-2014

Looks pritty much like mine, just newer.. unless something was corrupt..

It does actuall load/mount the IOS right?

what error do you get when you http://10.0.0.1 ?

the device does a sh tech? seems to function cli mode fine?

You might need to open a TAC on it.. I just have a few and know the injector is just a media converter... UTP cat5 to duplex coax (imho thin-net style).

seanvinson34 · ‎01-14-2014

what error do you get when you http://10.0.0.1 ?

webpage cannot be displayed

seems to function cli mode fine?

it seems to, but I'm also not very familiar with this piece of equipment

I am also receiving a blinking green light under (E) Ethernet and also under (S) Status

the device does a sh tech?

Heres what I received from this command:

ap#sh tech

------------------ show version ------------------

Cisco IOS Software, C1310 Software (C1310-K9W7-M), Version 12.4(25d)JA, RELEASE

SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Compiled Thu 09-Dec-10 16:12 by prod_rel_team

ROM: Bootstrap program is C1310 boot loader

BOOTLDR: C1310 Boot Loader (C1310-BOOT-M) Version 12.3(2)JA4, RELEASE SOFTWARE (

fc1)

ap uptime is 4 weeks, 3 days, 21 hours, 11 minutes

System returned to ROM by power-on

System image file is "flash:/c1310-k9w7-mx.124-25d.JA/c1310-k9w7-mx.124-25d.JA"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco AIR-BR1310G-A-K9 (PowerPCElvis) processor (revision A0) with 25590K/71

68K bytes of memory.

Processor board ID FTX1220U0G1

PowerPCElvis CPU at 262Mhz, revision number 0x0950

Last reset from power-on

1 FastEthernet interface

1 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 00:21:55:CC:70:3A

Part Number : 73-8960-09

PCA Assembly Number : 800-24963-06

PCA Revision Number : A0

PCB Serial Number : FOC12171GGX

Top Assembly Part Number : 800-28764-01

Top Assembly Serial Number : FTX1220U0G1

Top Revision Number : A0

Product/Model Number : AIR-BR1310G-A-K9

Configuration register is 0xF

------------------ show running-config ------------------

Building configuration...

Current configuration : 1009 bytes

!

version 12.4

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

service password-encryption

!

hostname ap

!

logging rate-limit console 9

enable secret 5

!

no aaa new-model

!

dot11 syslog

!

username Cisco password 7

!

bridge irb

!

interface Dot11Radio0

no ip address

no ip route-cache

shutdown

station-role root access-point

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

bridge-group 1 spanning-disabled

!

interface FastEthernet0

no ip address

no ip route-cache

bridge-group 1

no bridge-group 1 source-learning

bridge-group 1 spanning-disabled

!

interface BVI1

ip address dhcp client-id FastEthernet0

no ip route-cache

!

ip http server

no ip http secure-server

ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag

bridge 1 route ip

!

line con 0

line vty 0 4

login local

!

end

------------------ show stacks ------------------

Minimum process stacks:

Free/Size Name

2612/6000 soap_flash init

11624/12000 Setup

5604/6000 Autoinstall

5564/6000 Clock Update Proc

5628/6000 dot11 platform init

8836/12000 Init

11308/12000 BootP Resolver

5456/6000 RADIUS INITCONFIG

10828/12000 DHCP Autoinstall

2544/3000 Rom Random Update Process

9628/12000 Exec

Interrupt level stacks:

Level Called Unused/Size Name

4 2428500 8164/9000 dot11 radio interrupt

6 9538 8860/9000 NS16550 VECTOR

------------------ show interfaces ------------------

BVI1 is up, line protocol is up

Hardware is BVI, address is 0021.55cc.703a (bia 0021.55b2.4d70)

Internet address will be negotiated using DHCP

MTU 1500 bytes, BW 54000 Kbit/sec, DLY 5000 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation ARPA, loopback not set

ARP type: ARPA, ARP Timeout 04:00:00

Last input never, output never, output hang never

Last clearing of "show interface" counters never

Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0

5 minute input rate 0 bits/sec, 0 packets/sec

5 minute output rate 0 bits/sec, 0 packets/sec

79221 packets input, 15586895 bytes, 0 no buffer

Received 0 broadcasts, 0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort

103299 packets output, 33985371 bytes, 0 underruns

0 output errors, 0 collisions, 0 interface resets

48621 unknown protocol drops

0 output buffer failures, 0 output buffers swapped out

Dot11Radio0 is administratively down, line protocol is down

Hardware is 802.11G Radio, address is 0021.55b2.4d70 (bia 0021.55b2.4d70)

MTU 1500 bytes, BW 54000 Kbit/sec, DLY 1000 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation ARPA, loopback not set

ARP type: ARPA, ARP Timeout 04:00:00

Last input never, output never, output hang never

Last clearing of "show interface" counters never

Input queue: 0/1127/0/0 (size/max/drops/flushes); Total output drops: 0

Queueing strategy: fifo

Output queue: 0/30 (size/max)

5 minute input rate 0 bits/sec, 0 packets/sec

5 minute output rate 0 bits/sec, 0 packets/sec

0 packets input, 0 bytes, 0 no buffer

Received 0 broadcasts, 0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

0 input packets with dribble condition detected

0 packets output, 0 bytes, 0 underruns

0 output errors, 0 collisions, 0 interface resets

0 unknown protocol drops

0 babbles, 0 late collision, 0 deferred

0 lost carrier, 0 no carrier

0 output buffer failures, 0 output buffers swapped out

FastEthernet0 is up, line protocol is up

Hardware is PowerPCElvis Ethernet, address is 0021.55cc.703a (bia 0021.55cc.70

3a)

MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation ARPA, loopback not set

Full-duplex, 100Mb/s, MII

ARP type: ARPA, ARP Timeout 04:00:00

Last input 00:00:00, output 00:00:02, output hang never

Last clearing of "show interface" counters never

Input queue: 0/1127/0/0 (size/max/drops/flushes); Total output drops: 0

Queueing strategy: fifo

Output queue: 0/40 (size/max)

5 minute input rate 1000 bits/sec, 1 packets/sec

5 minute output rate 0 bits/sec, 0 packets/sec

2004070 packets input, 385155716 bytes

Received 2004070 broadcasts, 0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

0 watchdog

0 input packets with dribble condition detected

424653 packets output, 66628823 bytes, 0 underruns

0 output errors, 0 collisions, 2 interface resets

32 unknown protocol drops

0 babbles, 0 late collision, 0 deferred

0 lost carrier, 0 no carrier

0 output buffer failures, 0 output buffers swapped out

------------------ show controllers ------------------

!

interface Dot11Radio0

Radio AIR-MP31G, Base Address 0021.55b2.4d70, BBlock version 0.00, Software vers

ion 6.30.25

Serial number: FOC1218B109

Number of supported simultaneous BSSID on Dot11Radio0: 16

Carrier Set: Americas (US) (-A)

Uniform Spreading Required: No

Configured Frequency: 0 MHz Channel 0

Allowed Frequencies: 2412(1) 2417(2) 2422(3) 2427(4) 2432(5) 2437(6) 2442(7) 244

7(8) 2452(9) 2457(10) 2462(11)

Listen Frequencies: 2412(1) 2417(2) 2422(3) 2427(4) 2432(5) 2437(6) 2442(7) 2447

(8) 2452(9) 2457(10) 2462(11) 2467(12) 2472(13) 2484(14)

Beacon Flags: 0, Interface Flags 60109, Interface Events 0, Mode 9; Beacons are

disabled; Probes are disabled

Configured CCK Power: 100 mW

Configured OFDM Power: 100 mW

Active power levels by rate

1.0 to 54.0 , 0 mW

OffChnl Power: 32767, Rate 1.0

Allowed CCK Power Levels: 1 5 10 20 30 50 100

Allowed OFDM Power Levels: 1 5 10 20 30 50 100

Allowed Client Power Levels: 1 5 10 20 30 50 100

Receive Antennas : right-a

Transmit Antennas : right-a

Antenna: internal, Gain: Allowed 4, Reported 4, In Use 4

Active Rates:

Current Rates: basic-1.0 basic-2.0 basic-5.5 basic-11.0 6.0 9.0 12.0 18.0 24.0

36.0 48.0 54.0

Allowed Rates: 1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0

All Rates: 1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0

Default Rates: basic-1.0 basic-2.0 basic-5.5 basic-11.0 6.0 9.0 12.0 18.0 24.0

36.0 48.0 54.0

Best Range Rates: basic-1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0

Best Throughput Rates: basic-1.0 basic-2.0 basic-5.5 basic-11.0 basic-6.0 basic

-9.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0

Current Voice Rates: basic-5.5 basic-11.0 6.0 12.0 24.0 [disabled until voice p

acket-discard enabled]

Default Voice Rates: basic-5.5 basic-11.0 6.0 12.0 24.0

Managment Rates:

Multicast Rates:

Data Rate Sensitivity (rate, SNR dB, Contention dBm)

( 1.0, 1, -98) ( 2.0, 7, -94) ( 5.5, 9, -92) (11.0, 16, -86)

( 6.0, 7, -92) ( 9.0, 14, -87) (12.0, 12, -87) (18.0, 15, -84)

(24.0, 17, -82) (36.0, 24, -76) (48.0, 29, -73) (54.0, 33, -69)

ERP settings:.

Neighbors in non-erp mode:

Number of MFP Indices: 10

RFID Tag Detection: Disabled

Multicast Address filtered:

Packet type filtered:

Probe limit: active off, filter on, count 0, time 0

Assoc limit: active off, count 0, time 0

Radio Management (RM) Configuration: Regular AP, Mode 1, Disabled

MCST RSCs: [0]0x0 [1]0x0 [2]0x0 [3]0x0 [4]0x0 [5]0x0 [6]0x0 [7]0x0 [8]0x0

TKIP Cum Stats: STA MIC-L-Errs MIC-R-Errs Replay C-Measure

0000.0000.0000 00000000 00000000 00000000 00000000

AES-CCMP Cum Stats: 00000000 replays discarded

QBSS Load: 0x0, Policing Stats: Rx downgrades 0, Tx downgrades 0

Classifier Stats tx_on_up6 0, tx_on_up4 0

Configured Local Access Class Parameters

Back : cw-min 4 cw-max 10 fixed-slot 7 admission-control Off txop 0

Best : cw-min 4 cw-max 6 fixed-slot 3 admission-control Off txop 0

Video : cw-min 3 cw-max 4 fixed-slot 1 admission-control Off txop 3008

Voice : cw-min 2 cw-max 3 fixed-slot 1 admission-control Off txop 1504

Configured Cell Access Class Parameters

Back : cw-min 4 cw-max 10 fixed-slot 7 admission-control Off txop 0

Best : cw-min 4 cw-max 10 fixed-slot 3 admission-control Off txop 0

Video : cw-min 3 cw-max 4 fixed-slot 2 admission-control Off txop 3008

Voice : cw-min 2 cw-max 3 fixed-slot 2 admission-control Off txop 1504

SIP stats sip_udp_rx_pkt 0, sip_tcp_rx_pkt 0,

downlink classified_pkt 0,

uplink classified_pkt 0,

num_processed_SIP_Calls 0

Transmit queues: Limit 650 Current 0 In-Progress 0

---- Active --- In-Progress --------------- Counts --------------

Cnt Quo Bas Max Cnt Quo Bas Sent Discard Fail Retry Multi

Uplink 0 0 0 0 0 0 0 0 0 0 0 0

Voice 0 0 0 0 0 0 0 0 0 0 0 0

Video 0 0 0 0 0 0 0 0 0 0 0 0

Best 0 0 0 0 0 0 0 0 0 0 0 0

Back 0 0 0 0 0 0 0 0 0 0 0 0

BSSIDS Index Flags State Next Held Defer NonDefer Clients Tsf Dtim Txq

Driver TX blocks: in use 0, high 0, at reset 0, fail 0 drop 0

Off Channel Metrics: Timeouts - Tx 0 Beacon 0 DTIM MC Waits 0

---Clients AID VLAN Status Age Tx Mode Enc Key Rate

RxPkts KBytes Dup Dec Mic TxPkts KBytes Retry RSSI SNR

IP Address Pauses RSC

Video Report: Cnt Rate Retries/Tot

8021x auth in prog 0 allowed 0

Vlan BSSID Clients PSP Pri HT Encr Key0 Key1 Key2 Key3 SSIDs MFP

0n 0000 0 0 0 0 0 0

Protocol 55

Registers: io E8000000 mem 80000000 aux A0000000

0000 FF6A 0000 0000 0021 0000 0000 0000

0000 0000 0000 0000 0000 0000 0000 0000

0000 0000 0000 0000 0220 1A1C FFFF 0504

0000 0000 0000 0000 9936 0020 E5FF 73C9

00000000 18200340 30540041 BFFFF7FF FFFFFFEF 00000000 10840000 08008208

FFFFFDCE 00000FFF 9C6276F3 00690706 00000000 00000000 00008000 00008080

00000000 00000000 00000000 00000000 00000F7A 00000000 00000000 0000E6B4

Radio running: temp 0 C tx_power 0 bb_code 0x0

rssi_threshold 0x3E gain offset 0 platform 0

PCI sys_id: 0xA506 subsys_id 0x5500 (0x5501)

Unicast ciphers 0x0 mcast ciphers 0x0

Rid Ring:

A0000970: 01C08000 21D6A1BC * n

Rx Ring:

A0000950: 89380000 21BF493C * v, 89380000 21BF3EA8 v

A0000960: 89380000 21BF3414 v, 89380000 21BF2980 v

Tx Ring:

A0000800: 00000000 00000000 * n, 00000000 00000000 n

A0000810: 00000000 00000000 n, 00000000 00000000 n

A0000820: 00000000 00000000 n, 00000000 00000000 n

A0000830: 00000000 00000000 n, 00000000 00000000 n

A0000840: 00000000 00000000 n, 00000000 00000000 n

A0000850: 00000000 00000000 n, 00000000 00000000 n

A0000860: 00000000 00000000 n, 00000000 00000000 n

A0000870: 00000000 00000000 n, 00000000 00000000 n

A0000880: 00000000 00000000 n, 00000000 00000000 n

A0000890: 00000000 00000000 n, 00000000 00000000 n

A00008A0: 00000000 00000000 n, 00000000 00000000 n

A00008B0: 00000000 00000000 n, 00000000 00000000 n

A00008C0: 00000000 00000000 n, 00000000 00000000 n

A00008D0: 00000000 00000000 n, 00000000 00000000 n

A00008E0: 00000000 00000000 n, 00000000 00000000 n

A00008F0: 00000000 00000000 n, 00000000 00000000 n

A0000900: 00000000 00000000 n, 00000000 00000000 n

A0000910: 00000000 00000000 n, 00000000 00000000 n

A0000920: 00000000 00000000 n, 00000000 00000000 n

TxDn Ring:

A0000930: 802C0000 21D6A9C4 * v, 802C0000 21D6AAA4 v

A0000940: 802C0000 21D6AB84 v, 802C0000 21D6AC64 v

Multicast counters:

Internal MC counts:

0 (0) 0 (0) 0 (0) 0 (0) 0 (0) 0 (0) 0 (0) 0 (0) 0 (0) 0 (0) 0 (0) 0 (0) 0 (0) 0

(0) 0 (0) 0 (0)

-Channel Range- -------Rates------ Max Power Allowed

1 to 11 by 1 1.0 to 11.0 100 1 5 10 20 30 50 100

6.0 to 54.0 30

DOT11 Statistics (Cumulative Total/Last 5 Seconds):

RECEIVER TRANSMITTER

Host Rx K Bytes: 0 / 0 Host Tx K Bytes: 0 / 0

Unicasts Rx: 0 / 0 Unicasts Tx: 0 / 0

Unicasts to host: 0 / 0 Unicasts by host: 0 / 0

Broadcasts Rx: 0 / 0 Broadcasts Tx: 0 / 0

Beacons Rx: 0 / 0 Beacons Tx: 0 / 0

Broadcasts to host: 0 / 0 Broadcasts by host: 0 / 0

Multicasts Rx: 0 / 0 Multicasts Tx: 0 / 0

Multicasts to host: 0 / 0 Multicasts by host: 0 / 0

Mgmt Packets Rx: 0 / 0 Mgmt Packets Tx: 0 / 0

RTS received: 0 / 0 RTS transmitted: 0 / 0

Duplicate frames: 0 / 0 CTS not received: 0 / 0

CRC errors: 0 / 0 Unicast Fragments Tx: 0 / 0

WEP errors: 0 / 0 Retries: 0 / 0

Buffer full: 0 / 0 Packets one retry: 0 / 0

Host buffer full: 0 / 0 Packets > 1 retry: 0 / 0

Header CRC errors: 0 / 0 Protocol defers: 0 / 0

Invalid header: 0 / 0 Energy detect defers: 0 / 0

Length invalid: 0 / 0 Jammer detected: 0 / 0

Incomplete fragments: 0 / 0 Packets aged: 0 / 0

Rx Concats: 0 / 0 Tx Concats: 0 / 0

Multicast throttle drops: 0

Client TX pause count: 0

Media Direct Band Configuration

Unicast Video Redirect = 0

Client Min Phy Rate = 0

Max Retry Percentage = 0

Dot11 Current Video Transmission Metrics:

Arrivals:0 Q-Drops:0 Tries:0 Agg:0 Success:0 Fail:0

Dot11 5-second Video Transmission Metrics:

Arrivals:0 Tries:0 Agg:0 Success:0 Fail:0

Radio-Q-Peak:0 Video-Q-Peak:0 Video-Q-Drops:0

Delay - Tot Msec:0 10/20/40/40+ Msec:0/0/0/0

Dot11 1-second Video Transmission Metrics:

Q-util:0 max-tx-time:0 p-chan:0 p-video:0 L/r:0

Last radio reset code: 37

Radio resets - total:4 retries:0 failed:0

Reset Stats: -- Start Cnt: 1, Recovery: Cnt 0Last Ret: 200, Fails: 0, Recover

y Status: Stalled? NO, In Prog? NO

Code/Count: 37/00003 54/00001

Log Buffer:

PowerPCElvis Ethernet unit 0

PHY Hardware is Broadcom BCM5914 rev. 2 (id_register: 0x40, 0x6322)

rx_intr: 0 tx_intr: 0 mac_err_isr: 0 phy_link_isr:0

Current station address 0021.55cc.703a, default address 0021.55cc.703a

MAL register dump:

malcr 0x0007C082 0x180

malesr 0x00000000 0x181

malier 0x0000000F 0x182

maltxcasr 0x80000000 0x184

maltxcarr 0x80000000 0x185

maltxeobisr 0x00000000 0x186

maltxdeir 0x00000000 0x187

malrxcasr 0x80000000 0x190

malrxcarr 0x80000000 0x191

malrxeobisr 0x00000000 0x192

malrxdeir 0x00000000 0x193

maltxctp0r 0x01D6AEA0 0x1A0

malrxctp0r 0x01D6ADA0 0x1C0

malrcbs0 0x00000060 0x1E0

EMAC register dump:

emacmr0 0x18000000 0x00

emacmr1 0xA1788000 0x04

emactmr0 0x00000000 0x08

emactmr1 0x380F0000 0x0C

emacrmr 0x7D180000 0x10

emacisr 0x00000002 0x14

emacier 0x00000001 0x18

emaciah 0x00000021 0x1C

emacial 0x55CC703A 0x20

emacptr 0x0000FFFF 0x2C

emaclsah 0x00000000 0x50

emaclsal 0x00000000 0x54

emacipgr 0x00000004 0x58

emacstacr 0x002F8018 0x5C

emactrtr 0x18000000 0x60

emacrwmr 0x0F002000 0x64

emacoctx 0x041380E4 0x68

emacocrx 0x176FF93A 0x6C

UIC register dump:

uicsr 0x00009FB4 0xC0

uicer 0x803F0048 0xC2

uicmsr 0x00000000 0xC6

PHY register dump:

3000 782D 0040 6322 05E1 45E1 0005 2001 0000 0000 0000 0000 0000 0000 0000 0000

1000 0300 0000 0000 0200 008F 0400 0000 002F 8D1F 4400 008A 002F 0000 80A0

RX ring with 16 entries at 0x1D6ADA0, Buffer size 1524

Rxhead = 0x1D6ADF0 (10), Rxp = 0x111A11C (10)

00 pak=0x1060830 buf=0x1BF7E68 status=9C00 pak_size=0

01 pak=0x10604AC buf=0x1BF73D4 status=9C00 pak_size=0

02 pak=0x1060BB4 buf=0x1BF88FC status=9C00 pak_size=0

03 pak=0x105E88C buf=0x1BF1F34 status=9C00 pak_size=0

04 pak=0x105FA20 buf=0x1BF5418 status=9C00 pak_size=0

05 pak=0x1060128 buf=0x1BF6940 status=9C00 pak_size=0

06 pak=0x10620CC buf=0x1BFC874 status=9C00 pak_size=0

07 pak=0x105FDA4 buf=0x1BF5EAC status=9C00 pak_size=0

08 pak=0x1061640 buf=0x1BFA8B8 status=9C00 pak_size=0

09 pak=0x1062EDC buf=0x1BFF2C4 status=9C00 pak_size=0

10 pak=0x1060F38 buf=0x1BF9390 status=9C00 pak_size=0

11 pak=0x1061D48 buf=0x1BFBDE0 status=9C00 pak_size=0

12 pak=0x105E508 buf=0x1BF14A0 status=9C00 pak_size=0

13 pak=0x10627D4 buf=0x1BFDD9C status=9C00 pak_size=0

14 pak=0x10619C4 buf=0x1BFB34C status=9C00 pak_size=0

15 pak=0x10612BC buf=0x1BF9E24 status=DC00 pak_size=0

TX ring with 8 entries at 0x1D6AEA0, tx_count = 0

tx_head = 0x1D6AEB8 (3), head_txp = 0x111A15C (3)

tx_tail = 0x1D6AEB8 (3), tail_txp = 0x111A15C (3)

00 pak=0x0000000 buf=0x0000000 status=1400 pak_size=0

01 pak=0x0000000 buf=0x0000000 status=1400 pak_size=0

02 pak=0x0000000 buf=0x0000000 status=1400 pak_size=0

03 pak=0x0000000 buf=0x0000000 status=1400 pak_size=0

04 pak=0x0000000 buf=0x0000000 status=1400 pak_size=0

05 pak=0x0000000 buf=0x0000000 status=1400 pak_size=0

06 pak=0x0000000 buf=0x0000000 status=1400 pak_size=0

07 pak=0x0000000 buf=0x0000000 status=5400 pak_size=0

0 missed datagrams, 0 overruns

0 transmitter underruns, 0 excessive collisions

0 single collisions, 0 multiple collisions

0 dma memory errors, 0 CRC errors

0 alignment errors, 0 runts, 0 giants

emac/mal specific errors:

0 rx in range, 0 rx out range

0 mal_rx_serr, 0 mal_tx_serr

0 mal_rx_de, 0 mal_tx_de

0 emac_int

0 mal_err_isr

0 SQE errors, 0 tx CRC errors

0 output queue fail

------------------ show user ------------------

Line User Host(s) Idle Location

* 0 con 0 idle 00:00:23

Interface User Mode Idle Peer Address

------------------ show data-corruption ------------------

No data inconsistency errors have been recorded.

------------------ show file systems ------------------

File Systems:

Size(b) Free(b) Type Flags Prefixes

* 7483392 1940480 flash rw flash:

- - opaque rw bs:

7483392 1940480 unknown rw zflash:

- - opaque rw archive:

- - opaque rw system:

32768 31692 nvram rw nvram:

- - network rw tftp:

- - opaque rw null:

- - opaque ro xmodem:

- - opaque ro ymodem:

- - network rw rcp:

- - network rw ftp:

- - network rw http:

- - network rw scp:

- - network rw https:

------------------ show flash: all ------------------

Directory of flash:/

2 drwx 0 Mar 1 2002 23:49:39 +00:00 Test

3 drwx 256 Jan 1 1970 01:15:32 +00:00 c1310-k9w7-mx.124-25d.JA

152 -rwx 5 Mar 1 2002 00:15:39 +00:00 private-config

153 -rwx 1048 Mar 1 2002 00:15:39 +00:00 private-multiple-fs

154 -rwx 0 Mar 1 2002 00:00:03 +00:00 env_vars

7483392 bytes total (1940480 bytes free)

------------------ dir nvram: ------------------

Directory of nvram:/

30 -rw- 0 startup-config

31 ---- 0 private-config

1 -rw- 0 ifIndex-table

32768 bytes total (31692 bytes free)

------------------ show memory statistics ------------------

Head Total(b) Used(b) Free(b) Lowest(b) Largest(b)

Processor D2CB44 12389564 7066360 5323204 5237068 5256656

I/O 1900000 7340032 4632280 2707752 2707580 2707688

------------------ show process memory ------------------

Processor Pool Total: 12389564 Used: 7066272 Free: 5323292

I/O Pool Total: 7340032 Used: 4632268 Free: 2707764

PID TTY Allocated Freed Holding Getbufs Retbufs Process

0 0 11640760 831304 9313600 0 0 *Init*

0 0 12324 142912 12324 0 0 *Sched*

0 0 2259352 2409964 216696 4536992 4536992 *Dead*

0 0 0 0 1349016 0 0 *MallocLite*

1 0 10052 0 17064 0 0 Chunk Manager

2 0 196 196 4012 0 0 Load Meter

3 0 1034696 1032992 14768 0 0 Exec

4 0 3348 196 10164 0 0 Check heaps

5 0 0 0 7012 0 0 Pool Manager

6 0 196 196 7012 0 0 Timers

7 0 196 196 7012 0 0 AAA high-capacit

8 0 0 0 7012 0 0 AAA_SERVER_DEADT

9 0 0 0 13012 0 0 Policy Manager

10 0 0 0 25012 0 0 Crash writer

11 0 0 0 7012 0 0 RO Notify Timers

13 0 0 0 7012 0 0 ARP Input

14 0 588 0 7600 0 0 Entity MIB API

15 0 0 0 7012 0 0 HC Counter Timer

16 0 196 196 7012 0 0 GraphIt

17 0 0 0 7012 0 0 Net Input

18 0 0 0 7012 0 0 Critical Bkgnd

19 0 21704 152 13528 0 0 Net Background

20 0 68328420 68328420 13012 0 0 IDB Work

21 0 196 196 13012 0 0 Logger

22 0 92460 748 7136 0 0 TTY Background

23 0 0 0 10012 0 0 Per-Second Jobs

25 0 0 0 7012 0 0 Transport Port A

26 0 196 196 7012 0 0 Compute load avg

27 0 0 1056 7012 0 0 Per-minute Jobs

28 0 196 196 7012 0 0 Dot11 Install Mo

29 0 196 196 7012 0 0 sys monitor

30 0 196 196 7012 0 0 Power Injector m

31 0 196 196 7012 0 0 Dot11 driver

32 0 196 196 7012 0 0 Dot11 dumper

33 0 196 196 7012 0 0 Dot11 driver log

34 0 0 0 7012 0 0 Voice Metrics Ta

35 0 0 0 7012 0 0 SOAP LED Process

36 0 196 196 7012 0 0 AAA Server

37 0 0 0 7012 0 0 AAA ACCT Proc

38 0 0 0 7012 0 0 ACCT Periodic Pr

39 0 0 0 13012 0 0 IP Input

40 0 0 0 7012 0 0 ICMP event handl

42 0 196 196 7012 0 0 AAA Dictionary R

43 0 656 196 7472 0 0 CDP Protocol

44 0 0 0 7012 0 0 linktest

45 0 196 196 10012 0 0 Dot11 aaa proces

46 0 0 0 10012 0 0 pmkid

47 0 196 196 7012 0 0 Dot11 Mgmt & Ass

48 0 196 196 7012 0 0 DOT11 MFP IO

49 0 1324 196 8140 0 0 AiroIAPP Protoco

50 0 196 196 7012 0 0 Triggered events

51 0 196 196 10012 0 0 Dot11 auth Dot1x

52 0 0 0 7012 0 0 Dot11 Mac Auth

53 0 748 0 7760 0 0 Dot11CACprocess

54 0 196 196 7012 0 0 Dot1x Mgr Proces

55 0 0 0 7012 0 0 MAB Framework

56 0 0 0 7012 0 0 EAP Framework

57 0 0 0 7012 0 0 EAP Test

58 0 0 0 13012 0 0 TCP Timer

59 0 0 0 13012 0 0 TCP Protocols

60 0 0 0 7012 0 0 Socket Timers

61 0 0 0 7012 0 0 IP Traceroute

62 0 800 0 7812 0 0 L2MM

63 0 0 0 7012 0 0 MRD

64 0 0 0 7012 0 0 IGMPSN

65 0 3244 0 13256 0 0 HTTP CORE

66 0 1096 196 13912 0 0 Soap Upgrade fet

67 0 10540 196 17356 0 0 DDP

68 0 196 196 7012 0 0 WLCCP MFP AP

69 0 360 196 7176 0 0 Dot1x Supplicant

70 0 360 196 7176 0 0 Dot1x Supplicant

71 0 360 196 7176 0 0 Dot1x Supplicant

72 0 196 196 7012 0 0 LOCAL AAA

73 0 196 196 7012 0 0 AAA Cached Serve

74 0 196 196 7012 0 0 ENABLE AAA

75 0 196 196 7012 0 0 LINE AAA

76 0 66600 196 7828 0 0 TPLUS

77 0 392 196 9208 0 0 Crypto WUI

78 0 0 0 7012 0 0 EM Background Pr

79 0 0 0 13012 0 0 encrypt proc

80 0 196 196 7012 0 0 Soap Consoleless

81 0 66960 66184 13788 0 0 Crypto CA

82 0 0 0 13012 0 0 Crypto PKI-CRL

83 0 0 0 9012 0 0 Crypto SSL

84 0 0 0 7012 0 0 crypto engine pr

85 0 196 196 7012 0 0 AAA SEND STOP EV

86 0 196 196 7012 0 0 Dot11 LBS Proc

87 0 0 0 7012 0 0 Syslog Traps

88 0 196 196 7012 0 0 Radio Temperatur

89 0 3724 3724 13012 0 0 Syslog

92 0 0 32495900 13012 0 0 DHCP Client

94 0 196 196 13044 0 0 HyBridge Input P

95 0 512 348 7360 0 0 Tbridge Monitor

96 0 5412 5248 13208 0 0 Spanning Tree

97 0 33453996 3480 7012 0 0 RAC I/F Conf.

11695864 Total

------------------ show process cpu ------------------

CPU utilization for five seconds: 0%/0%; one minute: 0%; five minutes: 0%

PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process

1 0 3 0 0.00% 0.00% 0.00% 0 Chunk Manager

2 51 550818 0 0.00% 0.00% 0.00% 0 Load Meter

3 475 565 840 0.24% 0.37% 0.10% 0 Exec

4 1253541 281225 4457 0.00% 0.05% 0.05% 0 Check heaps

5 0 1 0 0.00% 0.00% 0.00% 0 Pool Manager

6 0 2 0 0.00% 0.00% 0.00% 0 Timers

7 0 2 0 0.00% 0.00% 0.00% 0 AAA high-capacit

8 0 1 0 0.00% 0.00% 0.00% 0 AAA_SERVER_DEADT

9 0 1 0 0.00% 0.00% 0.00% 0 Policy Manager

10 0 1 0 0.00% 0.00% 0.00% 0 Crash writer

11 1 1 1000 0.00% 0.00% 0.00% 0 RO Notify Timers

13 33858 80352 421 0.00% 0.00% 0.00% 0 ARP Input

14 1 2 500 0.00% 0.00% 0.00% 0 Entity MIB API

15 22 826230 0 0.00% 0.00% 0.00% 0 HC Counter Timer

16 65 2754084 0 0.00% 0.00% 0.00% 0 GraphIt

17 0 32 0 0.00% 0.00% 0.00% 0 Net Input

18 0 1 0 0.00% 0.00% 0.00% 0 Critical Bkgnd

19 28 826252 0 0.00% 0.00% 0.00% 0 Net Background

20 51 275412 0 0.00% 0.00% 0.00% 0 IDB Work

21 1 15 66 0.00% 0.00% 0.00% 0 Logger

22 41 2754073 0 0.00% 0.00% 0.00% 0 TTY Background

23 48 2754134 0 0.00% 0.00% 0.00% 0 Per-Second Jobs

25 0 1 0 0.00% 0.00% 0.00% 0 Transport Port A

26 21 550819 0 0.00% 0.00% 0.00% 0 Compute load avg

27 319831 45903 6967 0.00% 0.01% 0.00% 0 Per-minute Jobs

28 1 183608 0 0.00% 0.00% 0.00% 0 Dot11 Install Mo

29 6334 629456 10 0.00% 0.00% 0.00% 0 sys monitor

30 97907 1924609 50 0.00% 0.00% 0.00% 0 Power Injector m

31 13808 39941824 0 0.00% 0.00% 0.00% 0 Dot11 driver

32 0 2 0 0.00% 0.00% 0.00% 0 Dot11 dumper

33 0 2 0 0.00% 0.00% 0.00% 0 Dot11 driver log

34 20 2754125 0 0.00% 0.00% 0.00% 0 Voice Metrics Ta

35 369 18360875 0 0.00% 0.00% 0.00% 0 SOAP LED Process

36 0 2 0 0.00% 0.00% 0.00% 0 AAA Server

37 0 1 0 0.00% 0.00% 0.00% 0 AAA ACCT Proc

38 0 1 0 0.00% 0.00% 0.00% 0 ACCT Periodic Pr

39 7608 124872 60 0.00% 0.00% 0.00% 0 IP Input

40 0 1 0 0.00% 0.00% 0.00% 0 ICMP event handl

42 0 2 0 0.00% 0.00% 0.00% 0 AAA Dictionary R

43 14 277776 0 0.00% 0.00% 0.00% 0 CDP Protocol

44 18 2754126 0 0.00% 0.00% 0.00% 0 linktest

45 0 2 0 0.00% 0.00% 0.00% 0 Dot11 aaa proces

46 1 45903 0 0.00% 0.00% 0.00% 0 pmkid

47 1 2 500 0.00% 0.00% 0.00% 0 Dot11 Mgmt & Ass

48 0 2 0 0.00% 0.00% 0.00% 0 DOT11 MFP IO

49 26 3298517 0 0.00% 0.00% 0.00% 0 AiroIAPP Protoco

50 0 2 0 0.00% 0.00% 0.00% 0 Triggered events

51 0 2 0 0.00% 0.00% 0.00% 0 Dot11 auth Dot1x

52 0 1 0 0.00% 0.00% 0.00% 0 Dot11 Mac Auth

53 5 550827 0 0.00% 0.00% 0.00% 0 Dot11CACprocess

54 1 2 500 0.00% 0.00% 0.00% 0 Dot1x Mgr Proces

55 0 1 0 0.00% 0.00% 0.00% 0 MAB Framework

56 0 1 0 0.00% 0.00% 0.00% 0 EAP Framework

57 0 1 0 0.00% 0.00% 0.00% 0 EAP Test

58 0 1 0 0.00% 0.00% 0.00% 0 TCP Timer

59 0 1 0 0.00% 0.00% 0.00% 0 TCP Protocols

60 0 1 0 0.00% 0.00% 0.00% 0 Socket Timers

61 0 1 0 0.00% 0.00% 0.00% 0 IP Traceroute

62 1 3 333 0.00% 0.00% 0.00% 0 L2MM

63 0 1 0 0.00% 0.00% 0.00% 0 MRD

64 3 53 56 0.00% 0.00% 0.00% 0 IGMPSN

65 0 9182 0 0.00% 0.00% 0.00% 0 HTTP CORE

66 0 2 0 0.00% 0.00% 0.00% 0 Soap Upgrade fet

67 0 2 0 0.00% 0.00% 0.00% 0 DDP

68 1 137707 0 0.00% 0.00% 0.00% 0 WLCCP MFP AP

69 0 2 0 0.00% 0.00% 0.00% 0 Dot1x Supplicant

70 1 2 500 0.00% 0.00% 0.00% 0 Dot1x Supplicant

71 1 2 500 0.00% 0.00% 0.00% 0 Dot1x Supplicant

72 0 2 0 0.00% 0.00% 0.00% 0 LOCAL AAA

73 0 2 0 0.00% 0.00% 0.00% 0 AAA Cached Serve

74 0 2 0 0.00% 0.00% 0.00% 0 ENABLE AAA

75 0 2 0 0.00% 0.00% 0.00% 0 LINE AAA

76 1 2 500 0.00% 0.00% 0.00% 0 TPLUS

77 0 3 0 0.00% 0.00% 0.00% 0 Crypto WUI

78 0 1 0 0.00% 0.00% 0.00% 0 EM Background Pr

79 0 1 0 0.00% 0.00% 0.00% 0 encrypt proc

80 0 2 0 0.00% 0.00% 0.00% 0 Soap Consoleless

81 6 4 1500 0.00% 0.00% 0.00% 0 Crypto CA

82 0 1 0 0.00% 0.00% 0.00% 0 Crypto PKI-CRL

83 0 1 0 0.00% 0.00% 0.00% 0 Crypto SSL

84 0 1 0 0.00% 0.00% 0.00% 0 crypto engine pr

85 0 2 0 0.00% 0.00% 0.00% 0 AAA SEND STOP EV

86 0 2 0 0.00% 0.00% 0.00% 0 Dot11 LBS Proc

87 0 1 0 0.00% 0.00% 0.00% 0 Syslog Traps

88 0 45904 0 0.00% 0.00% 0.00% 0 Radio Temperatur

89 1 7 142 0.00% 0.00% 0.00% 0 Syslog

92 25 2754129 0 0.00% 0.00% 0.00% 0 DHCP Client

94 4801 364480 13 0.00% 0.00% 0.00% 0 HyBridge Input P

95 56 3077274 0 0.00% 0.00% 0.00% 0 Tbridge Monitor

96 0 2 0 0.00% 0.00% 0.00% 0 Spanning Tree

97 183 5543231 0 0.00% 0.00% 0.00% 0 RAC I/F Conf.

------------------ show process cpu history ------------------

ap 09:02:23 PM Monday Apr 1 2002 UTC

11111 22222

100

90

80

70

60

50

40

30

20

10

0....5....1....1....2....2....3....3....4....4....5....5....6

0 5 0 5 0 5 0 5 0 5 0

CPU% per second (last 60 seconds)

2

100

90

80

70

60

50

40

30

20

10

0....5....1....1....2....2....3....3....4....4....5....5....6

0 5 0 5 0 5 0 5 0 5 0

CPU% per minute (last 60 minutes)

* = maximum CPU% # = average CPU%

100

90

80

70

60

50

40

30

20

10

0....5....1....1....2....2....3....3....4....4....5....5....6....6....7..

0 5 0 5 0 5 0 5 0 5 0 5 0

CPU% per hour (last 72 hours)

* = maximum CPU% # = average CPU%

------------------ show dot11 associations all-client ------------------

------------------ show wlccp ap mobility traffic ------------------

------------------ show wlccp ap mobility forwarding ------------------

------------------ show crypto key mypubkey rsa ------------------

------------------ show inventory ------------------

NAME: "BR1310", DESCR: "Cisco Aironet 1300 Series (IEEE 802.11g) Bridge"

PID: AIR-BR1310G-A-K9 , VID: V04, SN: FTX1220U0G1

------------------ Mempool statistics ------------------

Head Total(b) Used(b) Free(b) Lowest(b) Largest(b)

Processor D2CB44 12389564 7066360 5323204 5238084 5256656

I/O 1900000 7340032 4632280 2707752 2707580 2707688

-------------- Top 100 allocator pc summary -----------

Allocator PC Summary for: Processor

PC Total Count Name

0x000FD014 1591200 1768 *Packet Header*

0x0008732C 955488 14 MallocLite

0x001ABE58 710836 93 Process Stack

0x001B1188 393528 6 MallocLite

0x0005AA84 262196 1 Init

0x0030C5A0 170884 17 Flashfs Sector

0x00509580 167236 1 802.11 driver Instance

0x0050A584 159252 1 Init

0x00194E14 98616 6 TW Buckets

0x008469A8 88736 1163 Init

0x00195BEC 85640 2 pak subblock chunk

0x004340C4 77252 1 Spanning Tree Opt Port Block

0x001741BC 69524 91 Process

0x001C0B3C 65588 1 Memory RO RU Chunks

0x001C0C80 65588 1 Memory RO RU Index Chunks

0x001A64A8 65588 1 CPU RO RU Chunks

0x0011AB34 65588 1 Buffer RO RU Chunks

0x0011AB5C 65588 1 Buffer RU Notify Chunks

0x0011A844 65588 1 Buffer Display Chunks

0x0009DF8C 65588 1 Parseinfo Blocks

0x001369EC 65588 1 IDB List Element Chunks

0x0052ABEC 65588 1 dot11drvr clients

0x005491E0 65588 1 Dot11 Pmkid Record Chunks

0x005593D8 65588 1 Dot11 Mgmt Station Chunk

0x000133FC 65588 1 AAA DB Chunk

0x0017C11C 62936 228 Init

0x0048AEBC 60076 1 BTE Entries

0x0008F544 49628 3 Init

0x000DBC6C 49204 1 Exec

0x001814A8 40104 2 RMI-RO_RU Chun

0x000F5044 32824 1 Init

0x0009E004 32820 1 Parse Nodes

0x00509FD8 32820 1 dot11 call control events data

0x0055BA1C 32820 1 Dot11 Mgmt SSID Chunk

0x0055BA54 32820 1 Dot11 Mgmt SSID Config. Chunk

0x00029314 32820 1 AAA SG ID table

0x005D2F24 26716 2 dot11 auth client chunk

0x00099500 26452 1 PM Event Pool

0x0007D868 26424 6 TTY data

0x001916C4 21364 7 Keepalive

0x001C19B8 20052 1 Managed Chunk Queue Elements

0x0017FD08 20052 1 RMI-RO_RU Chunks

0x0017FD30 20052 1 RMI-RO_RG Chunks

0x0017FE4C 20052 1 RMI-RU Chunks

0x005B2244 20052 1 wlan_ip_mcast_record

0x005B2D04 20052 1 wgb_ip_mcast_record

0x000A35CC 19748 258 Parser Linkage

0x000E79AC 19732 1 Init

0x00177088 17984 91 Process Events

0x001063FC 14860 5 *Hardware IDB*

0x0030C4BC 11704 154 soap_flash init

0x007BF4D4 11676 1 DISC specific structure members

0x000E7A2C 10776 86 Init

0x0036DA6C 10432 2 dhcpc_lq_chunk

0x0017BCD0 10260 5 Reg Function 1

0x0016DDDC 10052 1 List Elements

0x00179694 10052 1 Watched Queue

0x001796BC 10052 1 Watched Boolean

0x001796E4 10052 1 Watched Bitfield

0x0017FEB4 10052 1 RMI-RG Chunks

0x0016C940 10052 1 List Elements

0x00103018 10052 1 Packet Elements Cache

0x00103044 10052 1 Packet Elements

0x002C689C 10052 1 Pathents for parsing

0x002C68C4 10052 1 TTY Pathents for parsing

0x00311B84 10052 1 Flashfs Sector Pointers

0x0030B668 10052 1 Flashfs Sector

0x0052AC7C 10052 1 dot11 cc info

0x0015480C 10052 1 AAA chunk

0x001C1D28 10052 1 List Elements

0x005B14F0 10052 1 wlan_ip_mcast_host

0x005B152C 10052 1 wlan_ip_mcast_domain

0x002A5390 10052 1 IPTRACE probe chunks

0x003C00C4 10052 1 SNMP SMALL CHUNK

0x003C010C 10052 1 SNMP MEDIUM CHUNK

0x002BE794 10052 1 Time Range Entry Chunks

0x000E700C 10052 1 Init

0x000E7044 10052 1 Init

0x005D7728 10052 1 DDP UDP tx Chunk

0x00361E40 9652 1 NET ACCT LISTS

0x00361E7C 9652 1 SYS ACCT LISTS

0x0003964C 8852 1 PPP ACC LISTS

0x00799E10 8448 88 *Init*

0x0017BC3C 8208 4 Reg Function 1

0x0088D140 8128 1 Crypto Engine Object Table

0x0007C064 8080 102 NameDB String

0x00039688 8052 1 NET AUTHOR LISTS

0x000A4240 7668 71 Parser Mode

0x005510A0 7312 1 Dot11 Mgmt Client Send Fail Event Chunk

0x005510D8 7312 1 Dot11 Mgmt Client Not Found Event Chunk

0x00106418 6700 5 *Software IDB*

0x0039DEC0 6488 1 Init

0x00705468 6300 3 Init

0x007054B4 6300 3 Init

0x007054E8 6300 3 Init

0x000A42CC 5444 71 Parser Mode Q2

0x000A42A8 5404 71 Parser Mode Q1

0x000A6C2C 5368 10 Chain Cache No

0x0016DE18 5052 1 List Headers

0x00179734 5052 1 Watcher Info

Allocator PC Summary for: I/O

PC Total Count Name

0x000FD064 4628876 1767 *Packet Data*

0x007B8DD0 2056 1 Init

0x007BA3BC 896 4 Init

0x005C1480 296 2 Init

------------------ show region ------------------

Region Manager:

Start End Size(b) Class Media Name

0x00000000 0x018FD7FF 26204160 Local R/W main

0x00003000 0x0089B823 9013284 IText R/W main:text

0x0089B840 0x00B8E17F 3090752 IData R/W main:data

0x00B8E180 0x00D2CB3F 1698240 IBss R/W main:bss

0x00D2CB44 0x018FD7FF 12389564 Local R/W main:heap

0x01900000 0x01FFFFFF 7340032 Iomem R/W iomem

Free Region Manager:

Start End Size(b) Class Media Name

------------------ show buffers ------------------

Buffer elements:

1119 in free list (1119 max allowed)

849266 hits, 0 misses, 619 created

Public buffer pools:

Small buffers, 104 bytes (total 128, permanent 128):

128 in free list (20 min, 256 max allowed)

276656 hits, 0 misses, 0 trims, 0 created

0 failures (0 no memory)

Middle buffers, 600 bytes (total 128, permanent 128):

128 in free list (10 min, 256 max allowed)

84869 hits, 0 misses, 0 trims, 0 created

0 failures (0 no memory)

Big buffers, 1536 bytes (total 128, permanent 128):

128 in free list (5 min, 256 max allowed)

257231 hits, 0 misses, 0 trims, 0 created

0 failures (0 no memory)

VeryBig buffers, 4520 bytes (total 256, permanent 256):

256 in free list (0 min, 256 max allowed)

0 hits, 0 misses, 0 trims, 0 created

0 failures (0 no memory)

Large buffers, 5024 bytes (total 0, permanent 0):

0 in free list (0 min, 5 max allowed)

0 hits, 0 misses, 0 trims, 0 created

0 failures (0 no memory)

Huge buffers, 18024 bytes (total 0, permanent 0):

0 in free list (0 min, 2 max allowed)

0 hits, 0 misses, 0 trims, 0 created

0 failures (0 no memory)

Interface buffer pools:

Wlan Pool buffers, 2500 bytes (total 1127, permanent 1127):

548 in free list (0 min, 1127 max allowed)

579 hits, 0 fallbacks

563 max cache size, 559 in cache

2003962 hits in cache, 0 misses in cache

Header pools:

ap#

David Ritter · ‎01-14-2014

Sean,

My gut feeling is that a file is missing in the html folder..

The first screen that I get is the: server requests logon and if I cancel I get the 401 not authorized error.

In you config, ip http server is enabled, followed by the no secure http server entry..

If you have your working unit, you could compare file counts in the html directory.

However a reinstall of the .tar file might be in order.

seanvinson34 · ‎01-15-2014

David,

Unfortunately this is the only unit I have, I did pull down a c1310-k9w7-tar.123-7.JA3.tar I will reinstall.

Thanks,

Sean

Scott Fella · ‎01-15-2014

Check the MD5 hash also to make sure the file didn't get corrupted when you were downloading it.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***

seanvinson34 · ‎01-15-2014

Well..I am having a brain freeze I can't get the .tar to update...could you please send me the steps?