Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Aironet with Symbol and Zebra

I am facing a strange problem with 1242 APs amd Symbol wireless scanners and Zebra wireless printers. For the frequency channel I left the default config (least congested) and I had: printers working OK, scanners had signal flactuating. I changed the config with static non-overlaping frequencies and now : scanners ok, printers with signal flactuating (15%-75% even though user does not move)! Any ideas what I should look for or change in the parameters? I notice that I have many log messages of the form:

%DOT11-4-MAXRETRIES: Packet to client 00a0.xxxx.xxxx reached max retries, removing the client.

Any ideas? Thanx in advance...

2 REPLIES
Silver

Re: Aironet with Symbol and Zebra

Roaming messages are caused by the wireless clients seeing a better AP within it's range and they are constantly roaming/transferring from one AP to another.

New Member

Re: Aironet with Symbol and Zebra

Finally, the problem was interference from a nearby airport and the fact that the channels were configured as "least congested". When I configured them with specific freuency and away from te airport channels, it worked fine!

152
Views
0
Helpful
2
Replies