Airplay streams drop/skip when clients roam between Lightweight APs
We are currently running a WLC2106 w/ 3 1131 APs and in areas where coverage over laps our client airplay streams are skipping. I think this is caused when the client (iphone/ipad) switches APs. All ap's are setup in local mode and should support fast roaming correct? I am thinking the multi-cast settings are not properly setup or my ap is not configured correctly?
Controller --> General Ap Multicast mode = multicast w/ 220.127.116.11 group address, broadcast forwarding enabled.
enable global multicast mode, and enable igmp snooping are both checked.
Data rates on apps 1-11mbps disabled, 12 mandatory and all greater rates supported. P2p blocking action disabled
Airplay streams drop/skip when clients roam between Lightweight
We have two WLANS one with WPA2 PSK the other with WPA2 Auth 802.1X. The airplay devices are on the WPA2 SSID and the clients on the 802.1x, both go to the same vlan. Should I move all clients to the WPA2 SSID?
IntroductionHow to use the Wireless LAN Controller Configuration Analyzer (WLCCA)
Javier Contreras is a Senior Tech Lead for the Wireless Business Unit in Cisco, with over 2 decades of experi...
< PRE >
(#)For this reason being that : - application that doesn't use multicast, sends one copy of each packet ( data unit of traffic at layer 3 ) to each client (" who seeks the traffic ).- application that does use multicast, sends ...
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...