Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Anchor Controller WebAuth Custom Page Question

I have a, hopefully, quick question for the community.  I'm working on migrating our public wireless to a new controller and everything is working EXCEPT when the user is redirected to the WebAuth page, they're redirected to https://1.1.1.1  Since the cert on the appliance is self signed, the users get the "do you want to trust this page" message before they can accept the terms.  Is there a way I can redirect the users to the non-secure site?  I'm currently running code version 7.5.102.0 on the anchor controller.

Thanks in advance!

1 ACCEPTED SOLUTION

Accepted Solutions

Anchor Controller WebAuth Custom Page Question

yes there is.  you can disable secureweb for webauth..

config network web-auth secureweb disable

http://www.cisco.com/en/US/docs/wireless/controller/7.4/command/reference/security_solution/securitycr74_chapter_010.html#wp1465098047

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
2 REPLIES

Anchor Controller WebAuth Custom Page Question

yes there is.  you can disable secureweb for webauth..

config network web-auth secureweb disable

http://www.cisco.com/en/US/docs/wireless/controller/7.4/command/reference/security_solution/securitycr74_chapter_010.html#wp1465098047

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Re: Anchor Controller WebAuth Custom Page Question

Thanks Stephen - I actually went down this road but found it didn't redirect to the non-secure site.  Now that I disabled it again and rebooted the controller it's working.  Seems it was the reboot I was missing.

I greatly appreciate you help!

238
Views
0
Helpful
2
Replies